I've been working on collecting brass and getting my bench ready to go, and I'm to the point where I'm ready to start actually loading, minus buying the actual projectiles and the powder. I've gotten the Lee Classic turret mount starter kit with the auto-drum loader, and I plan on breaking myself in with 9mm brass. I've got a few hundred (700-ish) brass that's wet tumbled, deprimed and ready to go. I've been looking through the reloading manual that came with my kit, as well as a lot of the "recipes" posted here, and I'm just struggling on what powder to start with (and therefore what projectile to get). I'm looking to just start with some 115gr-ish 9mm for target shooting and plinking, so nothing high end. I've turned to the forums for advice on many things before, and figure this is no different. I certainly would prefer to buy local (actually want to start pressing this weekend), so keep that in mind if you would. I'm on the North East side of Indy, so I'm figuring Cabela's is probably going to be my go-to unless someone points me in a different direction. Thoughts/recommendations...