10mm 200gr WFNGC Load

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • DadSmith

    Grandmaster
    Rating - 100%
    1   0   0
    Oct 21, 2018
    22,177
    113
    Ripley County
    I finally got me a good load for the 10mm 200gr WFNGC bullet.
    CCI 350 primer
    Remington Nickel plated brass.
    9.6gr 800x
    COL: 1.260
    FPS: 1258 5 shot avg. Chrony was 10' from muzzle.
    4.5" Barrel.

    I worked up from 8.6gr to 9.6gr of 800x, and stopped because I achieved my goal of at least 700 (ft-lbs) of energy at muzzle.
    My new Bear load. Next step is accuracy testing at 50 yards. Fingers crossed...

    I suggest if you use this data to do as I have and work your way up as well. Your firearm may not tolerate what mine does.
     

    t-squared

    Master
    Site Supporter
    Rating - 100%
    7   0   0
    May 9, 2012
    1,765
    113
    Crown Point
    I've read quite a few threads about 10mm reloading where folks loooove the 800X except that it meters out of most measures like gravel. Are you hand measuring these or throwing the charges?

    That certainly sounds like a thumper of a load for sure!!
     

    DadSmith

    Grandmaster
    Rating - 100%
    1   0   0
    Oct 21, 2018
    22,177
    113
    Ripley County
    I've read quite a few threads about 10mm reloading where folks loooove the 800X except that it meters out of most measures like gravel. Are you hand measuring these or throwing the charges?

    That certainly sounds like a thumper of a load for sure!!

    I use the perfect powder measure just under what my goal is around 9.2 grains because it can throw a minimum of 0.3 grain to much or under. Then I trickle it to 9.6gr. I love reloading it's a hobby so I don't mind it.
     

    Shootin45super

    Marksman
    Rating - 100%
    1   0   0
    Aug 27, 2019
    200
    44
    Bloomington
    My best 10mm load is 200gr cast hollow point powder coated.
    10.4 gr bluedot
    federal lg primer
    Starline brass.
    At 50yds it will shoot 1 1/4 off of a rest.
    Eaa witness elite match pistol with holosun 2moa dot sight
    Plan on shooting a deer with it this year
     

    DadSmith

    Grandmaster
    Rating - 100%
    1   0   0
    Oct 21, 2018
    22,177
    113
    Ripley County
    My best 10mm load is 200gr cast hollow point powder coated.
    10.4 gr bluedot
    federal lg primer
    Starline brass.
    At 50yds it will shoot 1 1/4 off of a rest.
    Eaa witness elite match pistol with holosun 2moa dot sight
    Plan on shooting a deer with it this year

    I still have not been able to test my new load for accuracy. To busy working. I sure hope it's at least a 2" group at 50 yards. I find high velocity pistol rds to be less accurate than lower velocity rds.
     
    Top Bottom