Join INGunOwners For Free
Results 1 to 4 of 4

Thread: Dillon 1050

  1. #1
    Grandmaster Rookie's Avatar

    User Info Menu

    Dillon 1050

    I'm in the process of building my reloading room. Future plans are to get a Dillon 1050. My ceiling height is a touch over 7 feet. How tall is a Dillon 1050 with the bullet feeder and brass feeder?

  2. #2
    Grandmaster red_zr24x4's Avatar

    User Info Menu

    Give me a couple of hours to get home and I can get you a measurement from bench top to top of case feeder, but I can't help with the bullet feeder.
    I can tell you my basement is only like 6' and I can fill the case feeder pretty easily.
    "Courage is Being Scared to Death, but Saddling up Anyway" - John Wayne
    INGO# 3207

  3. #3
    Grandmaster red_zr24x4's Avatar

    User Info Menu

    Sorry for the delay, on our 1050 the case feeder is 37 1/2" from bench top to the highest point on the feeder bowl. Hope this helps
    "Courage is Being Scared to Death, but Saddling up Anyway" - John Wayne
    INGO# 3207

  4. #4
    Master Aszerigan's Avatar

    User Info Menu

    With a full stack & primer follower, that's going to be a pretty tight squeeze. With a sitting bench it won't be a problem. Extend your arm straight out from your chest and measure the distance to the floor. Subtract 4" and that'll be the height of your handle. Build your bench accordingly.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Button Dodge