Join INGunOwners For Free
Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17
  1. #11
    Grandmaster pudly's Avatar

    User Info Menu

    Added PPU/Prvi Partizan 6.5 Grendel ammo recall.

    Edit: Thanks BoR. Beat me to it.
    Not sure if that firearm or accessory has been subject to a safety recall? Read INGO's Comprehensive Firearm Safety Recall Listing for an easy way to check.

    The mob is not worthy of respect. It is not interested in truth, or even compassion. It is only interested in power.

  2. #12
    Grandmaster DoggyDaddy's Avatar

    User Info Menu

    From Century Arms:

    Century Arms, North America’s premier AK manufacturer, announced today the Canik Product Safety Warning and Severe Duty Upgrade Notice. This notice applies to Canik’s 9x19 mm pistols: TP9SA, TP9SF, TP9SFx, TP9SF Elite, TP9SF Elite-S. Canik’s other products are not subject to this notice. All Canik pistols comply with and exceed current industry and military abusive handling standards. There are no safety concerns with the pistols when used under ordinary conditions.
    Canik is committed to continuously improving its product’s performance. Evaluations and tests have shown that repeated abusive dropping of pistols may result in damage to safety features and unintentional discharge.
    DANGER: IF ANY FIREARM IS DROPPED INTERNAL PARTS MAY HAVE BEEN DEFORMED, DAMAGED OR DISABLED. The product must be inspected by a qualified gunsmith or returned for inspection after any significant impact.
    WARNING: REPEATED IMPACTS TO YOUR PISTOL TO TEST ITS SAFETY FUNCTIONS WILL DAMAGE INTERNAL PARTS, AND VOID ITS WARRANTY. Firearm abusive handling tests can be dangerous and should only be conducted by qualified individuals in controlled environments with proper safety precautions in place. Canik does not recommend that any customer conduct drop tests or other endurance tests before or after this Severe Duty Upgrade.
    WARNING: CONSUMERS SHOULD ONLY USE CANIK PARTS IN OUR PISTOLS. AFTERMARKET PARTS COULD DECREASE OR DISABLE SAFETY FEATURES OF YOUR CANIK PISTOL.
    Canik is committed to manufacturing safe, reliable, innovative and affordable firearms. We are offering a voluntary upgrade to the trigger safety spring and firing pin block spring on the Canik models noted above. This is to further increase the safety of Canik pistols for enhanced drop discharge prevention in heavy/severe duty conditions that are beyond industry standards. The Severe Duty Upgrade does not alter any feature or design of the pistols. Canik will provide all parts and workmanship at no charge, but customers will be responsible for shipping costs.
    Steps for upgrading your pistol? Our goal is to have the Severe Duty Upgrade process in place by Friday, September 8, 2017. After this date, please visit www.CanikUSA.com for complete instructions on how to receive your Severe Duty Upgrade.


    NOTE: This is NOT a recall. It is a safety notice only. My mistake.
    Last edited by DoggyDaddy; 09-01-2017 at 13:44.

  3. #13
    Grandmaster WebSnyper's Avatar

    User Info Menu

    https://www.smith-wesson.com/mp-380-...sumer-advisory

    M&P®380 SHIELD™ EZ™ Consumer Advisory

    Like any firearm, the function of the M&P®380 Shield™ EZ™ Manual Thumb Safety pistol can be influenced by the type and quality of ammunition used with the pistol. In the case of the M&P 380 Shield EZ Manual Thumb Safety, we have found that in very rare circumstances, ammunition that produces a high level of felt recoil can cause the manual safety to move from the fire to the “safety on” position during firing. Should this occur, you will not be able to fire the next round unless and until the manual safety is reset to the fire position.

    At Smith & Wesson, we are committed to designing and producing firearms that meet the highest quality and performance standards. To ensure that every Smith & Wesson handgun meets our standards for reliability and performance, as of April 4, 2018, we have engineered the manual safety so that it will be less susceptible to the influence of ammunition weight, velocity and loads. Any M&P 380 Shield EZ Manual Thumb Safety pistol produced before April 4, is eligible for a no-cost upgrade. To determine if this consumer advisory applies to your pistol, please utilize our serial number verification tool on our consumer advisory page. CLICK HERE to navigate to that page.

    If your pistol is subject to this advisory, please call Smith & Wesson at 1-800-331-0852 or email us at MP380EZAdvisory@Smith-Wesson.com. A FedEx return label and shipping instructions to facilitate the return of your M&P 380 Shield EZ pistol will be mailed to you promptly. If you have any questions, you may call 1-800-331-0852 for more information.

    WARNING: READ AND FOLLOW THE WARNINGS IN YOUR OWNER’S MANUAL. NEVER USE “PLUS-P” (+P), “PLUS-P-PLUS” (+P+); OR RELOADED AMMUNITION WITH THE M&P 380 EZ. ALWAYS USE FACTORY MANUFACTURED AMMUNITION PRODUCED TO SAAMI SPECIFICATIONS.
    Quote Originally Posted by Frank_N_Stein
    I am trying to turn every thread I involve myself in into a **** show.

  4. #14
    Master hopper68's Avatar

    User Info Menu

    Ruger American Pistol, 9MM only. https://ruger.com/dataProcess/APRetrofit/?r=banner

  5. #15
    Master

    User Info Menu

    https://www.rossisafetynotice.com/


    Rossi is issuing a voluntary safety warning on .38 Special and .357 Magnum revolvers made between the years 2005 and 2017 that may have a condition that could cause, under certain circumstances, the revolver to fire if dropped
    This Safety Warning covers .38 Special and .357 Magnum revolver models R351, R352, 461, R462, R851, R971, and R972 with serial numbers beginning with the letter Y, Z, or A through K.
    Rossi is developing inspection and repair solutions. Rossi will make every effort possible to ensure Rossi Revolvers will be inspected, serviced if necessary, and returned to customers in a prompt, timely fashion.
    Issues underlying this Safety Warning are currently pending before the court in a proposed class action lawsuit pending in the United States District Court for the Southern District of Florida styled Burrow v. Forjas Taurus, S.A., civil action file no. 1:16-cv-21606-EGT
    Socialism only works in two places: Heaven where they don't need it and hell where they already have it.
    Ronald Reagan

  6. #16
    Grandmaster WebSnyper's Avatar

    User Info Menu

    I don't currently trust the serial number checking page as it says it is a temporary staging environment, and it said my serial number is not impacted, but it also indicates all manufactured before Feb, 2019 unless I missed something else... anyway, I was able to order the chamber gauge with my serial number, so that's all that should matter at this point for me.




    DESCRIPTION - Please Read This If You Have A M&P15-22 Rimfire Firearm
    .

    PRODUCT AFFECTED:
    ALL models of M&P15-22 rifles and pistols manufactured before February 1, 2019.

    STOP USING YOUR M&P15-22 UNTIL IT HAS BEEN INSPECTED AND YOUR BOLT REPLACED (IF NECESSARY).
    Smith & Wesson has identified two M&P15-22 firearms from recent production on which the breech face counter bore depth was not within manufacturing specification. In those firearms, the lack of depth may allow the bolt, upon closing, to crush the rim of the case, causing the round to fire, cycling the bolt, and potentially resulting in multiple discharges without depressing the trigger. This issue can occur in the following two scenarios:

    1) With a loaded magazine in the firearm and the bolt locked to the rear, depressing the bolt release to allow the bolt to drop freely may ignite the round as the bolt closes without engaging the trigger and with the safety selector in either the safe or the fire position, and may also result in multiple discharges.

    2) With a loaded magazine in the firearm, bolt in the closed position and a round in the chamber and the safety selector in the fire position, depressing the trigger will cause the round to fire normally, however as the bolt cycles, the next round may be ignited by the bolt crushing the rim of the case as it closes, causing multiple discharges.

    We believe that these are isolated incidents, however, any unintended discharge of a firearm has the potential to cause injury. Therefore, we have developed this inspection procedure to ensure that all products in the field are safe to use. We are asking customers to perform the following procedure and to refrain from using their M&P15-22 until the bolt has been inspected and replaced as necessary.

    DESCRIPTION OF THE PRODUCT INVOLVED:
    The out of specification condition has been found only in bolts that were recently manufactured. While our investigation suggests that the incidents are isolated, we have established this inspection procedure as a precautionary matter to ensure that all M&P15-22 firearms in service meet our design specifications. We are asking consumers of all M&P15-22 firearms manufactured before February 1, 2019 to inspect their bolt for this condition.

    REMEDY/ACTION TO BE TAKEN:
    The bolt from your M&P15-22 must be inspected to determine whether it exhibits the condition identified in this notice. To determine whether your firearm is affected by this condition, please inspect your firearm by following the inspection instructions provided here.
    DOWNLOAD INSTRUCTION MANUAL | VIEW INSPECTION VIDEO


    CLICK HERE FOR FAQ FACT SHEET
    If you are uncomfortable in conducting the bolt inspection outlined here, or are unsure whether the condition described in this notice applies to your bolt, please send your bolt to Smith & Wesson for inspection and replacement if necessary.

    If you want Smith & Wesson to perform the inspection, send your bolt to Smith & Wesson for free inspection and replacement (if necessary).

    If you want to perform the bolt inspection yourself, contact us for the free M&P15-22 BOLT INSPECTION GAUGE Part Number: 3012155 OR place an ORDER ONLINE to recieve inspection gauge.

    If the bolt from your firearm is affected by the condition outlined in this notice, please send the bolt to Smith & Wesson. If necessary, your bolt will be replaced at no cost to you. Your bolt will be returned as quickly and efficiently as possible. All shipping and replacement costs will be covered by Smith & Wesson.
    To determine if this consumer advisory applies to your M&P15-22 firearm, please utilize our
    SERIAL NUMBER VERIFICATION TOOL

    Website For More Information: MP15-22SafetyAlert.com
    Email: MP15-22SafetyAlert@smith-wesson.com
    Customer Service Phone: 1-800-713-0356

    Quote Originally Posted by Frank_N_Stein
    I am trying to turn every thread I involve myself in into a **** show.

  7. #17
    Grandmaster WebSnyper's Avatar

    User Info Menu

    Got my gauge in the mail to check the bolt on my 15-22 and as I suspected, mine is fine.

    I had put in a couple of orders for the gauge since I never got the automated email for the orders I put in, plus I called them last week, so not sure which action got my gauge delivered.
    Quote Originally Posted by Frank_N_Stein
    I am trying to turn every thread I involve myself in into a **** show.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •