Rifle bedding recommendations?

[Maverick30]

Hey guys, I'm thinking about bedding the stock on my CZ 457 and was wondering who in the area you might recommend? I'm in south/central Indiana but could obviously ship it if they're too far away. Thanks for your help!

 

[natdscott]

And you don't feel up to it yourself?

I think YOU should do it. Tape the flat sides to give yourself a little clearance there, and glue away.

-Nate

ETA: Oh, and I wouldn't bed in that little steel "recoil lug". Just cast that out of Devcon and call it a day.

 

[DeadeyeChrista'sdad]

It's really not that tough. You can become a "you tube expert" in an hour or two and learn to do a passably good job.

 

[red_zr24x4]

It's not that bad, I did one a few years ago

 

[natdscott]

Concur on all the above.

Just use plenty of BRAIN, along with taking your time with clay, and tape, and wax.

It is much like painting a car...99% preparation, 1% glue.