"SOLD"
OK. If you build a lot of 1911's you will end up with a lot of "Good" parts. That's what this one is all about. Having a lot of "Good" parts in the parts pile.
Some of these parts I do not remember the origins. Some are brand new.
-The frame is a Double Stare I ended up with in a trade. It seems to be a lightweight piece. It is in spec and fit up nicely.
It is filled with hand fit EGW ignition controls. New.
EGW grip safety. New.
Wilson ambi thumb safety. New.
Magwell. I can not remember who's this is but it was in my parts.
Hogue flat cut grips. Had these.
Pearece gripe enhancements. Had these. Had the mag release and trigger.
-The slide is from a Springer loaded That I had Allen do a lot of trick work to. A lot of work.
The roll marks have been removed.
If you look in the picks you can see the relief cut along the bottom of the slide.
The slide is flat topped with serrations buried in that work.
There is a ball cut along the flat to curve on the sides.
There is a relief cut so the disconnector does not hamper the slide action.
Trijicon night sights.
Kart NM barrel. New but never installed. Para ramp.
ART barrel bushing. Had this.
2 piece EGW guide rod. Had this.
This is a sweet shooter. Slide to frame is good as is the rest of the fitment.
I find myself in a clear the safe mood so this one will go 1st.
You can not touch the parts in this gun for my asking price so do not go lets make a deal on this OK. There is well over $300 in machine work and coating.
I need $750 for this one. Like I said, add up the parts alone and you cant touch this.
Cash is king. No trades on this one.
Speedway area. Willing to roll out 50 miles in any direction from my front door.
Thanks for looking.
The LOGO is ours. It shows on all of the HotRods and race cars we have built. It can be removed if so desired....but I kinda like it...
Flat topped and serrated....
ATP.....Assume The Position
This is not etched in deep. It can be removed.
OK. If you build a lot of 1911's you will end up with a lot of "Good" parts. That's what this one is all about. Having a lot of "Good" parts in the parts pile.
Some of these parts I do not remember the origins. Some are brand new.
-The frame is a Double Stare I ended up with in a trade. It seems to be a lightweight piece. It is in spec and fit up nicely.
It is filled with hand fit EGW ignition controls. New.
EGW grip safety. New.
Wilson ambi thumb safety. New.
Magwell. I can not remember who's this is but it was in my parts.
Hogue flat cut grips. Had these.
Pearece gripe enhancements. Had these. Had the mag release and trigger.
-The slide is from a Springer loaded That I had Allen do a lot of trick work to. A lot of work.
The roll marks have been removed.
If you look in the picks you can see the relief cut along the bottom of the slide.
The slide is flat topped with serrations buried in that work.
There is a ball cut along the flat to curve on the sides.
There is a relief cut so the disconnector does not hamper the slide action.
Trijicon night sights.
Kart NM barrel. New but never installed. Para ramp.
ART barrel bushing. Had this.
2 piece EGW guide rod. Had this.
This is a sweet shooter. Slide to frame is good as is the rest of the fitment.
I find myself in a clear the safe mood so this one will go 1st.
You can not touch the parts in this gun for my asking price so do not go lets make a deal on this OK. There is well over $300 in machine work and coating.
I need $750 for this one. Like I said, add up the parts alone and you cant touch this.
Cash is king. No trades on this one.
Speedway area. Willing to roll out 50 miles in any direction from my front door.
Thanks for looking.
The LOGO is ours. It shows on all of the HotRods and race cars we have built. It can be removed if so desired....but I kinda like it...
Flat topped and serrated....
ATP.....Assume The Position
This is not etched in deep. It can be removed.
Last edited:
