IndianaResident
Expert
- Sep 3, 2010
- 1,439
- 48
I have a glock slide that was ceracoated and required minor removal of some ceracoat during assembly. Everything seems to work normally off the frame when this now complete slide drops on a frame the trigger fails to reset fully when cycled. It does move forward marginally (enough for a single click, allowing for a gritty trigger pull) but its only maybe 1/3 of its normal travel and the safe action blade doesn't return at all. I cant tell if the striker is coming through.
All my googling suggests a variety of frame based problems, which is expected. The hiccup is that three different frames behave exactly the same with this slide. Conversely all 3 frames work as normal with either of the other 2 slides. I have also tried swapping barrels and recoil springs on a whim but to no avail.
Thoughts? Where do I still have some ceracoat gumming things up....
Gen 3 Glock 17.
All my googling suggests a variety of frame based problems, which is expected. The hiccup is that three different frames behave exactly the same with this slide. Conversely all 3 frames work as normal with either of the other 2 slides. I have also tried swapping barrels and recoil springs on a whim but to no avail.
Thoughts? Where do I still have some ceracoat gumming things up....
Gen 3 Glock 17.