Join INGunOwners For Free
Results 1 to 7 of 7
  1. #1
    Plinker

    User Info Menu

    Browning Hi Power barrel disassembly issues

    So at the range recently I decided to field strip my Browning hi power down. However, the barrel refuses to come out of the slide and gets stuck on the inside of the slide when I pull it downwards instead of dropping free like how it should.

    is there any way to deal with this?

  2. #2
    Marksman

    User Info Menu

    Are you moving the barrel towards the muzzle while pulling away from the slide? It needs to go forward about 1/2 to 3/4 of an inch for the barrel to clear.
    I'd give my right arm to be ambidextrous...

  3. #3
    Plinker

    User Info Menu

    Move it towards the muzzle

  4. #4
    Plinker

    User Info Menu

    Itís not coming out regardless of where the barrel is, but Iíll try again later to be sure

  5. #5
    Marksman seldon14's Avatar

    User Info Menu

    Can you still rack the slide while assembled?

  6. #6
    zsm
    zsm is offline
    Plinker

    User Info Menu

    .

  7. #7
    Marksman

    User Info Menu

    I'm guessing now is the time to ask why you needed to take it down at the range. Maybe that will give us a clue...
    I'd give my right arm to be ambidextrous...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •