SOLD!
Hello INGO. I bought a huge assortment of knives and multi-tools a while back, and am now parting with the ones I cannot use. Some are like new, some are used with significant wear, and others are in-between. All conditions noted in descriptions below.
I want to sell this all as ONE LOT ONLY. I realize I will take a financial hit, but I don't have the time to deal with individual sale and a few of them are worth very little.
New value on this lot is about $675. Asking $250 OBO. Make me an offer, literally. The worst I can do is say no or counter you. I will not be offended by any offers.
Located in Fishers area and not willing to travel much. Can meet at 116th and Allisonville or 116th and 69 area.
PM to discuss further. Please do not bump this thread with questions. Thanks for looking!
Fixed Blade:
Ka-Bar Heavy-Duty Warthog – 10.25” overall, 5.5” blade, rubberized handle, Kydex sheath – used condition, scratches on blade – around $50 new
Gerber Profile Fixed Blade Drop Point – 8.5” overall, 4” blade, rubber handle, Titanium-coated blade, nylon sheath – like new with tiny nick in blade (would easily sharpen out) – around $20 new
Gerber Profile Fixed Blade Drop Point – 8.5” overall, 4” blade, rubber handle, Titanium-coated blade, nylon sheath – like new – around $20 new
SOG MN37N-P Seal Pup – 9” overall, 4.75” blade partially serrated, AUS-8 steel, 56-57 HRC, power coated finish, glass-reinforced nylon (GRN) scored handle with grip lines, black nylon sheath with belt loop attachment – like new except point of blade rough, and crack in top of handle (lifetime warranty from SOG – should repair) – around $45 new
SOG MN37N-P Seal Pup – 9” overall, 4.75” blade partially serrated, AUS-8 steel, 56-57 HRC, power coated finish, glass-reinforced nylon (GRN) scored handle with grip lines, black nylon sheath with belt loop attachment – like new – around $45 new
SOG Fusion Throwing Knives (set of 3) – 10” overall, 4.3” blade, stainless blades with hard-cased black coating, skeletonized handles, nylon sheath, paracord wrap on one knife – like new – around $40 new
Buck 655 Short Nighthawk – 10.25” overall, 4.8” blade partially serrated, 420HC blade steel, black powder coated blade, molded nylon handle with rubberized grips, nylon sheath – very good condition – around $55 new
Buck 655 Short Nighthawk – 10.25” overall, 4.8” blade partially serrated, 420HC blade steel, black powder coated blade, molded nylon handle with rubberized grips, nylon sheath – used with wear on blade and handle – around $55 new
Coleman Knife – 9.75” overall, 5” blade, stainless finish, simulated wood handle – good condition – around $10 new
Fury Sure Thrower 60024 (set of 3) – 6.5” overall, 3.5” blade, carbon steel, cord wrapped handles, nylon sheath – good condition – around $8 new
Folders:
SOG TF1-CP Trident – 8.5” overall open, 3.75” blade, partially serrated, AUS-8 steel with black TiNi finish, assisted open, glass-reinforced nylon handle with Digi-Grip, reversible belt clip, grooved handle to allow cutting of cord – like new – around $55 new
SOG TF1-CP Trident – 8.5” overall open, 3.75” blade, partially serrated, AUS-8 steel with black TiNi finish, assisted open, glass-reinforced nylon handle with Digi-Grip, reversible belt clip, grooved handle to allow cutting of cord – used with wear on blade – around $55 new
SOG FSA98-CP Flash II – 8” overall open, 3.5” blade, partially serrated, AUS-8 steel with satin finish, assisted open, glass-reinforced nylon handle, reversible clip – like new – around $45 new
Kershaw KER1550ST Ken Onion Blackout – 7.75” overall open, 3.25” blade, partially serrated, Sandvik 14C28N stainless steel with DLC coating, black coated, speed-safe opening system, assisted open, glass-filled nylon handle, carry clip – used condition with wear on blade and handle – around $50 new
Smith & Wesson S.W.A.T. II – 7.5” overall open, 3.25” blade, stainless, partially rubberized handle, carry clip – used with wear and nicks on blade – around $15 new
Jeep Folder – 7.5” overall open, 2.75” blade, black coated 440 stainless blade, skeletonized metal handle, carry clip – used with wear on blade and handle – no idea on value
Jeep Folder – 5.75” overall open, 2.25” blade, satin finish 440 stainless blade, shiny metal handle, carry clip – used with wear on blade and handle – no idea on value
Multi-Tools and Misc:
Glass-Breaking Hammer – about 6” long, very heavy head, rubberized handle – no idea on value
Gerber Suspension Multi-Plier – I don’t know much about these – spring-loaded needle nose pliers, lots of other tools – good condition - about $30 new
Gerber Multi-Plier Small – I don’t know much about these – pliers and other tools, nylon sheath, assortment of bits – good condition – no idea on value
Gerber Multi-Plier Large – I don’t know much about these – pliers and other tools, nylon sheath, assortment of bits – good condition – no idea on value
Thanks for looking!
Hello INGO. I bought a huge assortment of knives and multi-tools a while back, and am now parting with the ones I cannot use. Some are like new, some are used with significant wear, and others are in-between. All conditions noted in descriptions below.
I want to sell this all as ONE LOT ONLY. I realize I will take a financial hit, but I don't have the time to deal with individual sale and a few of them are worth very little.
New value on this lot is about $675. Asking $250 OBO. Make me an offer, literally. The worst I can do is say no or counter you. I will not be offended by any offers.
Located in Fishers area and not willing to travel much. Can meet at 116th and Allisonville or 116th and 69 area.
PM to discuss further. Please do not bump this thread with questions. Thanks for looking!
Fixed Blade:
Ka-Bar Heavy-Duty Warthog – 10.25” overall, 5.5” blade, rubberized handle, Kydex sheath – used condition, scratches on blade – around $50 new
Gerber Profile Fixed Blade Drop Point – 8.5” overall, 4” blade, rubber handle, Titanium-coated blade, nylon sheath – like new with tiny nick in blade (would easily sharpen out) – around $20 new
Gerber Profile Fixed Blade Drop Point – 8.5” overall, 4” blade, rubber handle, Titanium-coated blade, nylon sheath – like new – around $20 new
SOG MN37N-P Seal Pup – 9” overall, 4.75” blade partially serrated, AUS-8 steel, 56-57 HRC, power coated finish, glass-reinforced nylon (GRN) scored handle with grip lines, black nylon sheath with belt loop attachment – like new except point of blade rough, and crack in top of handle (lifetime warranty from SOG – should repair) – around $45 new
SOG MN37N-P Seal Pup – 9” overall, 4.75” blade partially serrated, AUS-8 steel, 56-57 HRC, power coated finish, glass-reinforced nylon (GRN) scored handle with grip lines, black nylon sheath with belt loop attachment – like new – around $45 new
SOG Fusion Throwing Knives (set of 3) – 10” overall, 4.3” blade, stainless blades with hard-cased black coating, skeletonized handles, nylon sheath, paracord wrap on one knife – like new – around $40 new
Buck 655 Short Nighthawk – 10.25” overall, 4.8” blade partially serrated, 420HC blade steel, black powder coated blade, molded nylon handle with rubberized grips, nylon sheath – very good condition – around $55 new
Buck 655 Short Nighthawk – 10.25” overall, 4.8” blade partially serrated, 420HC blade steel, black powder coated blade, molded nylon handle with rubberized grips, nylon sheath – used with wear on blade and handle – around $55 new
Coleman Knife – 9.75” overall, 5” blade, stainless finish, simulated wood handle – good condition – around $10 new
Fury Sure Thrower 60024 (set of 3) – 6.5” overall, 3.5” blade, carbon steel, cord wrapped handles, nylon sheath – good condition – around $8 new
Folders:
SOG TF1-CP Trident – 8.5” overall open, 3.75” blade, partially serrated, AUS-8 steel with black TiNi finish, assisted open, glass-reinforced nylon handle with Digi-Grip, reversible belt clip, grooved handle to allow cutting of cord – like new – around $55 new
SOG TF1-CP Trident – 8.5” overall open, 3.75” blade, partially serrated, AUS-8 steel with black TiNi finish, assisted open, glass-reinforced nylon handle with Digi-Grip, reversible belt clip, grooved handle to allow cutting of cord – used with wear on blade – around $55 new
SOG FSA98-CP Flash II – 8” overall open, 3.5” blade, partially serrated, AUS-8 steel with satin finish, assisted open, glass-reinforced nylon handle, reversible clip – like new – around $45 new
Kershaw KER1550ST Ken Onion Blackout – 7.75” overall open, 3.25” blade, partially serrated, Sandvik 14C28N stainless steel with DLC coating, black coated, speed-safe opening system, assisted open, glass-filled nylon handle, carry clip – used condition with wear on blade and handle – around $50 new
Smith & Wesson S.W.A.T. II – 7.5” overall open, 3.25” blade, stainless, partially rubberized handle, carry clip – used with wear and nicks on blade – around $15 new
Jeep Folder – 7.5” overall open, 2.75” blade, black coated 440 stainless blade, skeletonized metal handle, carry clip – used with wear on blade and handle – no idea on value
Jeep Folder – 5.75” overall open, 2.25” blade, satin finish 440 stainless blade, shiny metal handle, carry clip – used with wear on blade and handle – no idea on value
Multi-Tools and Misc:
Glass-Breaking Hammer – about 6” long, very heavy head, rubberized handle – no idea on value
Gerber Suspension Multi-Plier – I don’t know much about these – spring-loaded needle nose pliers, lots of other tools – good condition - about $30 new
Gerber Multi-Plier Small – I don’t know much about these – pliers and other tools, nylon sheath, assortment of bits – good condition – no idea on value
Gerber Multi-Plier Large – I don’t know much about these – pliers and other tools, nylon sheath, assortment of bits – good condition – no idea on value
Thanks for looking!
Last edited:
