Turn-key .260 Rem F-Class package . Just add a scope
$2500
(Scope is GONE but there are more accessories now)
Would trade for a good pickup.
I'm thinking about getting out of my F-Class setup, as I'm not sure I'll ever have time to compete, and I need a pickup.
Barrel has 69 rounds through it, the first 50 of which were cleaned after every shot, then after every three shots for the next fifteen, then one more time after the last four.
Savage 116 SS LA
custom built 260 remington match
HS precision stock
Custom 2 knob kydex cheek riser
Accurate mag system/bottom metal
Farrel custom ordered 20moa steel scope rail
CBI 28" full 1.015 bull barrel 1-8 twist
Pacific tool & gauge bolt face
Glades armory spiral flute bolt and bolt handle
Northland shooter supplies machined and trued
NSS Recoil lug and barrel nut
Seekins 30mm rings
60 rds of Factory Ammo
-20rds Nosler Custom 125gr .260 Trophy Partition
-20rds Federal Vital-Shok .260
-20rds Remington Core-Lokt .260 .140gr
132rds .260 Hand loads*- All using CCI 200 LR primers. All Lapua Brass in once-fired. All Winchester brass is new except for 16rds once-fired.
-35rds Sierra 130gr HPBT in Lapua brass, 44gr IMR 4350
-20rds Berger 140gr VLD in Lapua brass, 41gr IMR 4350
-15rds Nosler Accubond Spitzer, Lapua Brass, 44gr IMR 4350
-6rds 130 Sierra 130gr HPBT in Win. Brass, 44gr IMR 4350
-10rds Berger VLD 140gr in Win. Brass, 42.6gr H4350
-7rds 140gr Hornady AMAX in Win. Brass, 42.6gr H4350
-20rds 123gr Hornady ELD, Win. Brass, 44gr H4350
-4rds 140gr Berger VLD, Win. Brass, 41gr IMR 4350
-15rds 130gr Nosler Accubond Spitzers, Win. Brass, 44gr IMR 4350
16rds once-fired uncleaned winchester .260 (resized) brass
1,240 CCI 200 Large Rifle Primers.
98 Lapua .260 once-Fired brass. 28 ready for loading, 70 additional once-fired Lapua .260 brass available in loaded rds can be pulled.
64 New .243/.260 Winchester Brass Sized to 260 and primed
50 New Winchester .243 Brass for re-sizing to .260. No primers and No re-sizing done yet.
147 Sierra Game King 6.5 .264 130gr HPBT Projectiles (same run)
170 Hornady AMAX .264 140GR Match (Same run) Projectiles
65 Berger VLD Target 140gr 6.5mm Match projectiles
70 Hornady ELD Match .264 123gr Projectiles
All the reloading gear also goes, as does the Caldwell 'Rock' front rest, a Caldwell Chrony, etc.
*The hand loads will need to be sold as parts for disassembly
**Trades need to be worth $2500 or pretty close. There's $4000+ in all this.
$2500
(Scope is GONE but there are more accessories now)
Would trade for a good pickup.
I'm thinking about getting out of my F-Class setup, as I'm not sure I'll ever have time to compete, and I need a pickup.
Barrel has 69 rounds through it, the first 50 of which were cleaned after every shot, then after every three shots for the next fifteen, then one more time after the last four.
Savage 116 SS LA
custom built 260 remington match
HS precision stock
Custom 2 knob kydex cheek riser
Accurate mag system/bottom metal
Farrel custom ordered 20moa steel scope rail
CBI 28" full 1.015 bull barrel 1-8 twist
Pacific tool & gauge bolt face
Glades armory spiral flute bolt and bolt handle
Northland shooter supplies machined and trued
NSS Recoil lug and barrel nut
Seekins 30mm rings
60 rds of Factory Ammo
-20rds Nosler Custom 125gr .260 Trophy Partition
-20rds Federal Vital-Shok .260
-20rds Remington Core-Lokt .260 .140gr
132rds .260 Hand loads*- All using CCI 200 LR primers. All Lapua Brass in once-fired. All Winchester brass is new except for 16rds once-fired.
-35rds Sierra 130gr HPBT in Lapua brass, 44gr IMR 4350
-20rds Berger 140gr VLD in Lapua brass, 41gr IMR 4350
-15rds Nosler Accubond Spitzer, Lapua Brass, 44gr IMR 4350
-6rds 130 Sierra 130gr HPBT in Win. Brass, 44gr IMR 4350
-10rds Berger VLD 140gr in Win. Brass, 42.6gr H4350
-7rds 140gr Hornady AMAX in Win. Brass, 42.6gr H4350
-20rds 123gr Hornady ELD, Win. Brass, 44gr H4350
-4rds 140gr Berger VLD, Win. Brass, 41gr IMR 4350
-15rds 130gr Nosler Accubond Spitzers, Win. Brass, 44gr IMR 4350
16rds once-fired uncleaned winchester .260 (resized) brass
1,240 CCI 200 Large Rifle Primers.
98 Lapua .260 once-Fired brass. 28 ready for loading, 70 additional once-fired Lapua .260 brass available in loaded rds can be pulled.
64 New .243/.260 Winchester Brass Sized to 260 and primed
50 New Winchester .243 Brass for re-sizing to .260. No primers and No re-sizing done yet.
147 Sierra Game King 6.5 .264 130gr HPBT Projectiles (same run)
170 Hornady AMAX .264 140GR Match (Same run) Projectiles
65 Berger VLD Target 140gr 6.5mm Match projectiles
70 Hornady ELD Match .264 123gr Projectiles
All the reloading gear also goes, as does the Caldwell 'Rock' front rest, a Caldwell Chrony, etc.
*The hand loads will need to be sold as parts for disassembly
**Trades need to be worth $2500 or pretty close. There's $4000+ in all this.
Last edited: