Got some machining stuff I don't really need. Can be picked up in Decatur or Fort Wayne during the weekdays. USPS money order or cash is the only payment options. Please contact by IM.
Quick change tool blocks from a South Bend lathe. I'm bundling all of this stuff together. Most tool blocks are Armstrong brand. All are in good shape, some have some light surface rust, but nothing the won't clean up. The boring bar block is 3/4" diameter. The bar has been ground on some. It includes 3 packs of inserts. The insertable turning tool block has 2 different tools, right and left hand cut, with 11 packs of inserts and 1 partial pack. The parting tool block comes with a few parting tools. The knurling tool is missing 2 inserts, otherwise good. Threading tool block has a rotating insert that you bring on the top to resharpen, looks like it has a lot of life left. The block with the 2 HSS tool blanks is just a straight holder, as is the empty one. Also including the 9/16" shank left hand turning tool with inserts and boring bar set. $150 + shipping for the lot.
SPF South Bend lathe parts. Everything as one lot in the picture. These were parts that came with a South Bend Heavy 10 lathe. What you see is what you get. $50 + shipping SPF
Lathe insert lot- all new, several different styles.$60 $35 +shipping for the lot
SPF Top Notch style insert grooving tool. Used, shank has been milled down. Uses larger series of inserts. Comes with 3 boxes of various inserts. $25 + shipping SPF
SPF Top Notch style insert grooving tool. Used, but in good shape. Uses smaller series of inserts comes with 13 inserts. $20 + shipping SPF
Large 60 Degree Turning tool. Used, in good shape. Has a .750 shank. Comes with 2 steel inserts and a cast iron insert. $20 + shipping
Carboloy 45 degree turning tool. Great condition, comes with seat. .750 shank. Unsure what insert it takes, but tool numbers are marked, so it shouldn't be hard to find something. $20 + shipping
Carboloy PTAPR-12-3 60° turning tool. Used, has some pitting in a few spots, but otherwise good usable shape. 1" shank. $15 + shipping
60 degree insert boring bar. Great condition. Comes with 1 insert and screw. .625 diameter. $15 + shipping
5- Mitsubishi S-STUCR102 insertable boring bars. New, never used. Has a little light freckling in the finish from storage. 5/8" diameter. Takes TC 60° triangle style inserts. $35 + shipping each.
3- Mitsubishi S-STUCR123 insertable boring bars. New, never used. 3/4" diameter. Takes TC 60° triangle style inserts. $45 + shipping each
Mitsubishi S-SCLCR insertable boring bar. New, never used. Has some heavy freckling, but in otherwise good shape. 1" diameter. Takes CC style 80° inserts. $55 + shipping
Quick change tool blocks from a South Bend lathe. I'm bundling all of this stuff together. Most tool blocks are Armstrong brand. All are in good shape, some have some light surface rust, but nothing the won't clean up. The boring bar block is 3/4" diameter. The bar has been ground on some. It includes 3 packs of inserts. The insertable turning tool block has 2 different tools, right and left hand cut, with 11 packs of inserts and 1 partial pack. The parting tool block comes with a few parting tools. The knurling tool is missing 2 inserts, otherwise good. Threading tool block has a rotating insert that you bring on the top to resharpen, looks like it has a lot of life left. The block with the 2 HSS tool blanks is just a straight holder, as is the empty one. Also including the 9/16" shank left hand turning tool with inserts and boring bar set. $150 + shipping for the lot.
INCLUDED IN THE LOT-
Lathe insertable turning/facing tool- uses 60° triangle inserts, left hand cut, 3/8" shank, comes with 11 full packs and 1 partial pack of inserts.
Lathe insertable turning/facing tool- uses 60° triangle inserts, left hand cut, 9/16" shank, comes with 1 full pack of inserts.
Boring bar set- used, all .750" shank, uses HSS tool blank.
SPF South Bend lathe parts. Everything as one lot in the picture. These were parts that came with a South Bend Heavy 10 lathe. What you see is what you get. $50 + shipping SPF
Lathe insert lot- all new, several different styles.
SPF Top Notch style insert grooving tool. Used, shank has been milled down. Uses larger series of inserts. Comes with 3 boxes of various inserts. $25 + shipping SPF
SPF Top Notch style insert grooving tool. Used, but in good shape. Uses smaller series of inserts comes with 13 inserts. $20 + shipping SPF
Large 60 Degree Turning tool. Used, in good shape. Has a .750 shank. Comes with 2 steel inserts and a cast iron insert. $20 + shipping
Carboloy 45 degree turning tool. Great condition, comes with seat. .750 shank. Unsure what insert it takes, but tool numbers are marked, so it shouldn't be hard to find something. $20 + shipping
Carboloy PTAPR-12-3 60° turning tool. Used, has some pitting in a few spots, but otherwise good usable shape. 1" shank. $15 + shipping
60 degree insert boring bar. Great condition. Comes with 1 insert and screw. .625 diameter. $15 + shipping
5- Mitsubishi S-STUCR102 insertable boring bars. New, never used. Has a little light freckling in the finish from storage. 5/8" diameter. Takes TC 60° triangle style inserts. $35 + shipping each.
3- Mitsubishi S-STUCR123 insertable boring bars. New, never used. 3/4" diameter. Takes TC 60° triangle style inserts. $45 + shipping each
Mitsubishi S-SCLCR insertable boring bar. New, never used. Has some heavy freckling, but in otherwise good shape. 1" diameter. Takes CC style 80° inserts. $55 + shipping
Last edited:
