Got some machining stuff I don't really need. Can be picked up in Decatur or Fort Wayne during the weekdays. USPS money order, cash or Zelle are the only payment options. Please contact by PM.
MAKE ME AN OFFER ON ANY OF THIS STUFF
Mitutoyo 0-1" Disk Mics- used, nice shape. $75 + shipping
Starrett No. 124 Inside Mics- used, nice shape, has gage # electropenciled on thimble. $75 + shipping
Mitutoyo 0-1" Spline Mics- used, nice shape, has MAC electropenciled on the frame, larger style frame. $75 + shipping
Brown & Sharpe BestTest .0005" Vertical Dial Test Indicator- used, nice shape, comes with flexible post, .0935" contact point. $75 + shipping
Boice .0001" Dial Indicator- used, in good shape, 1/4" mount hole in tang on back. $40 + shipping
Ex-Cell-O .0005" Dial Indicator- used, in good shape, .090" travel, multiple reference needles. Flat back. $25 + shipping
SOLD Federal .001" Dial Indicator- used, in good shape, .250" travel, 1/4" mount hole in tang on back. Needle returns slow, but does seem to repeat. Probably could use a pull apart and cleaning. SOLD $20 + shipping SOLD
Gage Master .001" Dial Indicator- has mount for ways on South Bend Heavy 10 lathe, may fit others. Plunger moves freely, but there is no return spring. Otherwise in decent shape. $20 + shipping
TaeguTec DNMG 432 FC CT3000 Inserts- pack of 10 new DNMG 432 carbide inserts, fits 55° DNMG turning tools and boring bars. $50 + shipping
SOLD Quick change tool block from a South Bend lathe. The boring bar block is 3/4" diameter. The bar has been ground on some. It includes 3 packs of inserts. Also including the 9/16" shank left hand turning tool with inserts and boring bar set. SOLD $20 + shipping for the lot.SOLD
Large 60 Degree Turning tool. Used, in good shape. Has a .750 shank. Comes with 2 steel inserts and a cast iron insert. $15 + shipping
SOLD Carboloy 45 degree turning tool. Great condition, comes with seat. .750 shank. Unsure what insert it takes, but tool numbers are marked, so it shouldn't be hard to find something. SOLD $15 + shipping SOLD
Carboloy PTAPR-12-3 60° turning tool. Used, has some pitting in a few spots, but otherwise good usable shape. 1" shank. $15 + shipping
60 degree insert boring bar. Great condition. Comes with 1 insert and screw. .625 diameter. $15 + shipping
SOLD 3- Mitsubishi S-STUCR102 insertable boring bars. New, never used. Has a little light freckling in the finish from storage. 5/8" diameter. Takes TC 60° triangle style inserts. SOLD $30 + shipping each. SOLD
2- Mitsubishi S-STUCR123 insertable boring bars. New, never used. 3/4" diameter. Takes TC 60° triangle style inserts. $40 + shipping each
SOLD Mitsubishi S-SCLCR insertable boring bar. New, never used. Has some heavy freckling, but in otherwise good shape. 1" diameter. Takes CC style 80° inserts. SOLD $50 + shipping
MAKE ME AN OFFER ON ANY OF THIS STUFF
Mitutoyo 0-1" Disk Mics- used, nice shape. $75 + shipping
Starrett No. 124 Inside Mics- used, nice shape, has gage # electropenciled on thimble. $75 + shipping
Mitutoyo 0-1" Spline Mics- used, nice shape, has MAC electropenciled on the frame, larger style frame. $75 + shipping
Brown & Sharpe BestTest .0005" Vertical Dial Test Indicator- used, nice shape, comes with flexible post, .0935" contact point. $75 + shipping
Boice .0001" Dial Indicator- used, in good shape, 1/4" mount hole in tang on back. $40 + shipping
Ex-Cell-O .0005" Dial Indicator- used, in good shape, .090" travel, multiple reference needles. Flat back. $25 + shipping
SOLD Federal .001" Dial Indicator- used, in good shape, .250" travel, 1/4" mount hole in tang on back. Needle returns slow, but does seem to repeat. Probably could use a pull apart and cleaning. SOLD $20 + shipping SOLD
Gage Master .001" Dial Indicator- has mount for ways on South Bend Heavy 10 lathe, may fit others. Plunger moves freely, but there is no return spring. Otherwise in decent shape. $20 + shipping
TaeguTec DNMG 432 FC CT3000 Inserts- pack of 10 new DNMG 432 carbide inserts, fits 55° DNMG turning tools and boring bars. $50 + shipping
SOLD Quick change tool block from a South Bend lathe. The boring bar block is 3/4" diameter. The bar has been ground on some. It includes 3 packs of inserts. Also including the 9/16" shank left hand turning tool with inserts and boring bar set. SOLD $20 + shipping for the lot.SOLD
Large 60 Degree Turning tool. Used, in good shape. Has a .750 shank. Comes with 2 steel inserts and a cast iron insert. $15 + shipping
SOLD Carboloy 45 degree turning tool. Great condition, comes with seat. .750 shank. Unsure what insert it takes, but tool numbers are marked, so it shouldn't be hard to find something. SOLD $15 + shipping SOLD
Carboloy PTAPR-12-3 60° turning tool. Used, has some pitting in a few spots, but otherwise good usable shape. 1" shank. $15 + shipping
60 degree insert boring bar. Great condition. Comes with 1 insert and screw. .625 diameter. $15 + shipping
SOLD 3- Mitsubishi S-STUCR102 insertable boring bars. New, never used. Has a little light freckling in the finish from storage. 5/8" diameter. Takes TC 60° triangle style inserts. SOLD $30 + shipping each. SOLD
2- Mitsubishi S-STUCR123 insertable boring bars. New, never used. 3/4" diameter. Takes TC 60° triangle style inserts. $40 + shipping each
SOLD Mitsubishi S-SCLCR insertable boring bar. New, never used. Has some heavy freckling, but in otherwise good shape. 1" diameter. Takes CC style 80° inserts. SOLD $50 + shipping
Last edited:
