WTS: 11 Inch Remington 870 Barrel

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Status
    Please reply by conversation.

    Yamadog35

    - - - - - - - - - - - -
    Site Supporter
    Rating - 100%
    33   0   0
    Nov 23, 2008
    743
    12
    Central Indiana
    * SOLD *

    I got this for an SBS project, but decided to go a different direction. The barrel can be purchased here for $300. I will sell this one for $200 FTF or can ship on your dime.
    The barrel is threaded at the end and comes with a stand-off breacher threaded on. With the breacher removed, the barrel is 11". With the breacher installed it is about 12-5/8".
    Per the photo below, you could cut the barrel where the threads start and it would be 10".

    I'm located on the Indy Southside (Southport) area. I can meet up around the Indy area for FTF transaction. Will ship on your dime.
    Please PM interest or questions.

    This is an Internet photo with the breacher threaded on.
    v5OvX5P.jpg


    This photo compares this barrel to a standard 870 barrel. This illustrates that the mounting lug is moved about 2 inches closer to the receiver. This also shows the barrel with the breacher removed. You could cut the threaded portion off and shorten the barrel to about 10 inches.
    e2pFFCC.jpg
     
    Last edited:
    Status
    Please reply by conversation.
    Top Bottom