Kriss Victor failure

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Rating - 0%
    0   0   0
    Nov 7, 2011
    1,229
    38
    I post this problem some time ago here on INGO.
    When I fire or even just pull on the trigger on my Kriss Victor.
    The stock bows. it does not take much to see the barrel to lower.
    I asked a friend to build a triangle brace to fit under the stock.
    He made a nice tight fitting brace.
    I tested it out. GUESS WHAT!
    The DA-M carbine still flexes from the rear sight to past the stock swivel.
    This is where my brace starts.
    It is still a piece of Cr-p.
    Just make sure you go for a head shot and they are close.
    Or else you could hit them in the knee.

    I also had to take a piece of thermal form plastic and make a stock cover extension.
    That end of stock drop off. It was just in the spot to jam against my jaw bone.

    I also had to mount a 1/2 inch angle aluminum stock to the bolt draw handle side.
    It is to keep my thumb form getting slapped my the bolt actuation handle as it flies back and forward.
    Kriss just happened to put two mounting screw holes on each side of the Victor.
    I used them to mount the angle with two M4-27 metric screws.
     

    vitamink

    Master
    Site Supporter
    Rating - 100%
    46   0   0
    Mar 19, 2010
    4,868
    119
    INDY
    I think your problem is that you bought the Korean knock-off. The Kriss Vector is a nice gun. The Kriss Victor is substandard crap. Kim Jong Un is using your money to nuke California.
     
    Rating - 0%
    0   0   0
    Nov 7, 2011
    1,229
    38
    I think your problem is that you bought the Korean knock-off. The Kriss Vector is a nice gun. The Kriss Victor is substandard crap. Kim Jong Un is using your money to nuke California.

    Vitamink In your site supporter photo. I see where you are pointing you automatic.
    pull the trigger!

    If you can prove Kodiak Range in South Bend, In. ordered a Korean knock-off.
    I am sure you would be willing to testify in court.

    Also please tell Kriss at the next NRA convention. They are displaying them there.

    In your thread photo. You are showing to much cleavage over your bra.
     

    vitamink

    Master
    Site Supporter
    Rating - 100%
    46   0   0
    Mar 19, 2010
    4,868
    119
    INDY
    You know you want to display your Victor on my Futon. My milkshake brings all the boys to the yard.

    I can’t testify in court for 2 reasons:
    1: there is usually a daycare on site that THE MAN feels I need to keep however many feet away from.
    2: VitaminK’s 11th commandment, “Thou shalt not bear state’s witness”
     

    duffman0286

    Master
    Rating - 100%
    14   0   0
    Feb 3, 2011
    1,642
    38
    Wayne Co
    Please show some photos of the guard you installed to protect your hand from the reciprocating bolt handle
    This is what i want to know! last i checked my 9mm is a non reciprocating model as they have always been... and the orginal stock does have some flex its pretty minor and you really have to bear down on it to get any flex/twist... they redesigned the stock not along ago to stiffen it a bit more but personally i like the original design.... but there is no flex of any kind before the hinge knuckle (or at lease nothing that would cause change of impact or sight alignment problems) kinda have to agree you might have a airsoft stock those things are pretty soft
     
    Rating - 0%
    0   0   0
    Nov 7, 2011
    1,229
    38
    Please show some photos of the guard you installed to protect your hand from the reciprocating bolt handle

    I would like to show the videos of my stock flexing.
    I still do not know how to download from my computer

    Yes it flexes with the slightest pressure on the trigger hand grip.
     

    KJQ6945

    Grandmaster
    Site Supporter
    Rating - 100%
    4   0   0
    Aug 5, 2012
    37,538
    149
    Texas
    I would like to show the videos of my stock flexing.
    I still do not know how to download from my computer

    Yes it flexes with the slightest pressure on the trigger hand grip.

    The stock flexes, we get it, what's the big deal? The stock on the Kriss is not good for butt stroking bad guys.
    I bought a Kriss SBR in 2012. I never had any issues with accuracy. It's a soft shooting, smg style platform. If you know the stock is gonna flex, quit pulling it into your shoulder so hard, it's not a Mosin.
     
    Top Bottom