I have a Star and an Astra in largo but do not shoot them much. If I get a hankering to I just use 9x19 brass and seat the bullet out to create a longer load that fires. I have had good luck with cast swc's.
I had a 365 that after about 100 rds the recoil spring started to uncoil and lock up the gun. Called Sig and explained, they sent new recoil spring assembly no questions asked.
I picked up an Accumount, seems OK but scope is offset to the right. Maybe the rings that you can get from them ( that I did not get ) compensate. I need to do more range time to tell if it is worth it.
I have had this 1917 Eddystone for about 50 years in grease and Interarms box just sitting there. I decided that I might want to shoot it, as my 70+ eyes don't do well with irons anymore and it has a nice peep. So I clean it up and it is 8-18 built with an Eddy 7-18 barrel, arsenal rebuilt due...
Thanks,You are right. I have thought about buying it over the years but I keep talking myself out of it and spend the money on bullets, powder, or something.
I am thinking about putting a scope on one of my K-31's.
There are several no drill, no tap mounts out there but I have never seen any of them.
Anybody try one ?
Thanks guys, I worked up a load with 748, 168 hpbt, going 2550 fps with no pressure.
Got a load with TAC to same specs. Have not tried them yet on paper, we will see.
Thanks, I have checked 3 or 4 manuals and Hodgens site. They list both H335 and H380 but nobody shows 748. I will most likely use H380 but hoping for data with 748
I do not think you will be able to sleeve just the chamber. If you are interested in altering some 45-70 brass so it will not split you can by swageing the inside of the 45-70 brass by pressing a rod into the case to increase the base dia. so that it is closer to the chamber of the 11.7 then you...