SOLD Unused die set
Full length sizing die
Seating die
Factory crimp die
Rifle charging die with riser
shellholder, dipper, and paperwork
$30
FTF north side Indy
PM with questions. Do not bump ad
SOLDGander Mountain Guide Series lockable hard case
**I have the keys**
Outside 32" x 13.5"
Inside 31.25" x 13" x 3.75"
Outside of case is in excellent shape, inside will need new bottom foam.
$25
FTF north side Indy
PM with questions. Do not bump ad.
SOLD Red/green dot
Flip-up caps
2X screw on multiplier
Vortex low mount ring
Vortex high cantilever mount
Has all boxing, paperwork, tools, and lens cloth
Was mounted on a .22lr for about 200 rounds. Went back to a scope.
Like new condition
** This is a Strikefire, not a Strikefire II **
$100
REMOVED - Adjustable bipod legs
Attach directly to 1913 rail without tools
Push button rotate and extend
Rock solid mount up.
Used but in great shape
FDE
$125
SOLD 2 - Sig P238 factory 6 rd. mags
Like new condition
$25 ea.
Removed 1 - Hogue wrap around grip for P238
OD green not cut for ambi safety
$10
Removed 1 - Hogue smooth rosewood grip panels for P238
Not cut for ambi safety
$20
FTF north side Indy
PM with questions. Do not bump ad
SOLD- Glock 23 Gen 3 13 rd. magazines .40 cal.
Have factory and Magpul base plates
Like new condition
$20 ea. or $30 for both
SOLD 1 - Meprolight Tru Dot tritium sights for Glock
Rear is orange, front is green
Standard height
Fits models 17, 19, 22, 23, 34, & 35...
SOLDNew and never used, but no box.
Wheeler AR vise/stand
Rubber footed steel base
Adjustable
Hammer block
Area to hold bolt for disassembly
Perfect for cleaning and lower maintenance
$40
FTF on north side of Indy
Please PM with questions. Do not bump ad
Just ventured into the .300 BLK world.
Cut my first batch of .223 cases down.
Started prepping them based on my hornady handbook (9th edition).
it states, (on page 380 if you're looking), that the max. case length is 1.40" and a trim length of 1.39"
which is how I prepped them.
After some double...
Big thanks to INGO member 7.62.
He was recommended to me by Brad (Brad's Knives) for his sharpening service Xtreme Blade Sharpening.
I took him a Benchmade flipper and a Cassel P.A.C.K. For sharpening and he didn't disappoint.
Super nice guy, super quick turn around (24 hours in my case), and...
Ad withdrawn
WTS: HPI NITRO RS4 3 TYPE SS NITRO POWERED R/C ROAD CAR - ALL WHEEL DRIVE
CAR WAS USED VERY LITTLE. VIRTUALLY NO WEAR OUTSIDE OF THE REPLACEABLE BODY AND A FEW SCRATCHES ON THE BOTTOM. MOTOR WAS PREPPED AND STORED PROPERLY. ALL ELECTRONICS WORK.
FEATURES:
HPI 12R MOTOR 1+HP
TWO...
SOLD
OPENED BUT NEVER USED
500 - 14 GRAM 3 COLOR CLAY CHIPS IN 5 DENOMINATIONS
DEALER AND BLIND MARKERS
DICE SET
4 DECKS OF CARDS
WOODEN BOX AND REMOVABLE CHIP TRAY (no scratches)
$25
FTF ON NORTH SIDE OF INDY
WILL TRAVEL WITHIN REASON
PM WITH QUESTIONS
TEAM ASSOCIATED RC10 T3 ELECTRIC RC CAR WITH RADIO & ELECTRONICS *PICS*
SOLD
WTS: TEAM ASSOCIATED RC10 T3 ELECTRIC RC TRUCK
TEAM ASSOCIATED RC10 T3 W/ FULL BEARING UPGRADE
3 REEDY MOTORS
2 LEXAN BODIES
FUTABA MAGNUM SPORT RADIO W/ RECEIVER, STEERING SERVO, AND ELECTRONIC SPEED CONTROL
2...
WTS: RCBS PRIMER POCKET SWAGER TOOL 2
SOLD
USED BUT IN LIKE NEW CONDITION
ALLOWS POCKET SWAGING ON THE PRESS
HAS TOOLHEADS AND RODS FOR BOTH SMALL AND LARGE PRIMER POCKETS
$30
*PICS* 20 RDS. HORNADY CUSTOM .40 S&W 180gr. XTP
SOLD
1 BOX OF HORNADY CUSTOM .40 S&W 180gr. XTP
$15
FTF ON NORTH SIDE OF INDY
WILL TRAVEL WITHIN REASON
PM WITH QUESTIONS
500 BRASS CASES IN .40 CAL S&W *PICS*
SOLD
500 ONCE FIRED CASES IN .40 S&W
MIXED HEADSTAMP BUT PRIMARILY FEDERAL AND WINCHESTER
HAS BEEN TUMBLED WITH CORN COB
$20
FTF ON NORTH SIDE OF INDY
WILL TRAVEL WITHIN REASON
PLEASE DIRECT QUESTIONS THROUGH PM
LEE DELUXE 4 DIE SET IN .40 S&W *PICS*
SOLD
LEE DELUXE PISTOL DIE SET in .40 S&W
Set is lightly used but in like new condition
INCLUDES 4 DIES, SHELL HOLDER, CASE, INSTRUCTIONS, AND DIPPER
$25
FTF ON NORTH SIDE OF INDY
WILL TRAVEL WITHIN REASON
PLEASE DIRECT QUESTIONS THROUGH PM
LEE DELUXE 4 DIE SET IN .45 ACP *PICS*
SOLD
LEE DELUXE PISTOL DIE SET in .45 ACP
Set is lightly used but in like new condition
INCLUDES 4 DIES, SHELL HOLDER, CASE, INSTRUCTIONS, AND DIPPER
$25
SOLD
WTS: Remington 870 Express custom - 6+1 capacity
* Receiver, both barrels, mag tube, mag extension & nut, and forend tube have been Cerakoted in Magpul FDE.
* 18" smooth bore custom cut vent rib barrel (Remington). Screw in Hi Viz front FO sight. Rib clamp Hi viz rear FO.
* 20" rifled...