I need an AR15 trigger to work on. I will pay $15 (by paypal) for the trigger. I don't need the spring or pin or dis-connector. I just need the trigger.
It must NOT have been filed, ground, or polished, because that is what I want to do. :popcorn:
I can send you the payment and you can send...
I tried my Dremel on an old AR15 trigger and I swear it removed steel without even putting any polishing compound on the felt.
Is this possible (or maybe I just didn't notice it before I buffed the trigger) ? :dunno:
louielouie:popcorn:
Are there any dentists or informed members who might know what grit normal toothpaste might be? :popcorn:
I am thinking of polishing some parts of my AR and wonder if I need to buy a special grit or if I can just give toothpaste a try.
My last issue of Shotgun News had an article that...
.223 DAG Blanks want to go to far into the chamber? Thoughts?
I bought a few boxes of the DAG 5.56x45 blanks that are currently being sold by AMMOMAN and others. It is a plastic case with the head of the case being metal.
I am having trouble with the blanks wanting to locate too far into the...
PSA has:
Winchester 5.56 40gr Jacketed Frangible 20rds USA556JF
in stock for $11.99 for 20 rds. I just bought 7 boxes and shipping and handling was only $7. That's 64 cents a round delivered to my door. Here is the ammo.
Winchester 5.56 40gr Jacketed Frangible 20rds USA556JF - .223/5.56mm -...
I just bought 8 boxes of Remington UMC .223 55gr. ammo with 20 rounds to a box for $9.99 a box.
Not backordered but IN STOCK!!!! :rockwoot:
www.basspro.com
I have been searching for days for a decent "in stock" price and this is by far the best I have found per box.
I have...
SOLD, SOLD and SOLD
This is new. I only had it in my rifle long enough to cycle it a couple of times. It has never been used to fire a round.
I did some checking before I bought it new and found out that the YHM BCG is made by Stag and Stag is a mil-spec supplier.
I bought this BCG when...
I bought a couple of fossils for my grandson and they are really dry.
Can I coat them with polyurethane or what can I seal them with to make them easier for kids to handle.
Some sealant that will protect the fossil on the surface and keep the kids from getting the fossil "dust" all over...
I read in a posting where someone said you could make Nickel Boron shine by buffing it with Flitz.
I don't have any Flitz, but would Silver Polish work?
louielouie
After a lot of research on the internet, I decided to send my bolt carrier group to WMD guns to have them do a Nickel Boron Coating. The price isn’t bad; $100 to coat your bolt carrier group and hammer.
My question is; has anyone sent their BCG to WMD guns to get them NiB coated and if so...
Can anyone tell me the military specs. on the AR15 BCG (bolt carrier group) ?
I am specifically trying to find out about the YHM (Yankee Hill Machine) Bolt carrier assembly.
So far I have been told by YHM that they get them from Stag Arms and that they are mil-spec. That’s all they can tell...
Leftover or Used AR15 BCG- OVER-FINISHED
I DECIDED TO BUY NEW BCG.
THANKS FOR LOOKING.
louielouie
Does anyone have a "leftover" Bolt Carrier Group (prefer AR15 semi-auto) that is sitting around since you upgraded to a plated BCG or replaced your DI gas system with a piston system. I have...
Does anyone out there have any knowledge (firsthand or heresay) about the M16 bolt carrier assembly being offered for sale by Sportsmans Guide?
It is marked RG on the side of the carrier?
Full M16 Bolt Assembly - 938923, Replacement Parts at Sportsman's Guide
louielouie
I did not know about the "Break-in" procedure (shoot one shot, clean, shoot another shot, clean etc.) until after I had already put about 80 rounds through my AR15.
Will I gain anything by starting the "Break-in" procedure or am I just "as accurate as I am going to get" since I have already...
Has anyone else tried the McFarland Bolt Gas Rings? This is the 3 in one gas ring (s) that have 3 rings but they are all wound into one ring i.e. there is only one fat ring that is the combined length of 3 rings.
I put one on my AR15 today and noticed that it is really a tight fit. I didn’t...
I read somewhere that if you loosen the carrier key screws ( on an AR15) for any reason, that you should replace them with new screws and torque to specs.
I know when torqueing head-bolts on a car that the screws stretch each time you tighten them, and I assume the carrier key screws stretch...
When I first built my AR15 the handguards were nice and tight i.e. no gaps anywhere the handguards touched.
Now, the handguards fit nice and tight against each other on the ends but in the middle there is a slight gap that runs about 75% of the length of the handguards.
Can you tell me...
I just bought a new NcStar brass bore sighter for my 5.56 NATO AR15 rifle.
I had the action cocked open to slide the bore sighter into place in the chamber.
After checking the aim I tried to remove the boresighter. It was tight so I tapped the butt stock lightly on the floor. Well the action...
I have a PSA upper and decided to change out the gas block as part of a make-over.
I got the flash hider off fairly easily, but then I ran into the 2 taper pins that hold the FSB in place.
I ruined about 4 punches and did not even "phase" the taper pins.
I called to verify that they should...