Twangbanger
Grandmaster
- Oct 9, 2010
- 7,104
- 113
I reassembled the frame after having the mainspring / grip safety / safety and three-pronged spring out of the gun, and the hammer will only fall to half-cock - what did I do wrong? It appears the sear is not in the right position wrt. the hammer...but I'm unsure how to visually or mechanically assure they're lined up right before reassembling.
Any good tips? (Many years ago I could never get the mainspring to latch on my Ruger Mk2, before somebody showed me the trick about pointing the barrel up at an angle to get the parts lined up right...I'm hoping this is a similar situation).
Any good tips? (Many years ago I could never get the mainspring to latch on my Ruger Mk2, before somebody showed me the trick about pointing the barrel up at an angle to get the parts lined up right...I'm hoping this is a similar situation).