Ingram M10A1 9mm SMG...PRICE DROP!
SOLD!
Ingram M10A1 9mm (.45 ACP)
Military Armament Corporation
Stephenville, TX. USA
Serial # A604887
It was sold to me by former NRA president Sandra Froman (whom I met at Gunsite) and had previously belonged to her late husband, Bruce Nelson (famed leather/holster maker...designer of the "summer special" IWB).
It had never been fired when I received it.
I have fired less than 1000 rounds combined through the 3 barrels.
It originally came with a 4.5" barrel and top mounted cocking lever.
It used single feed Zytel (or steel) magazines.
It is only set up for 9mm but .45 ACP uppers are readily available.
I purchased a double feed bolt so that I could use Walther MP or older Cobray mags.
Also, since I am an old guy, I wanted optics on my Mac and purchased 2 uppers with side-cocking levers...it just went on from there.
I purchased an Uzi 9mm and have decided to part with my trusty Mac-10.
Here is a breakdown of prices for all the included accessories.
Accessories My Cost New
AWC 9mm suppressor $800
AWC Nomex cover $45
Side cocking upper (shorty with piccatiny rail) $230
Side cocking upper (10" with piccatiny rail, foregrip) $355
Double feed bolt assembly (for original metal mags) $159
Single feed Zytel magazines x 10 (35 each) $350
Original Cobray double feed magazines x 5-rare (70 ea) $350
Converted Walther MPK/MPL double feed magazines $60
Extended mag paddle release $20
2 piece receiver pin $30
AR Stock $50
Stock adapter $60
K-Grip $85
Tasco 1 x 30 red dot $42
Tasco ProPoint 1 x 26 red dot $72
Recoil buffers, set of 5 (currently sold in set of 3/$12.95) $13
I will also include a Cobray "swat case" and operating manual (not shown in photos).
Asking price for Mac-10 and all accessories: [STRIKE]$6000[/STRIKE] OBO.
SMG and suppressor are both transferable on a Form 4.
Feel free to send PM with any questions.
Thank you for looking.
I will consider trades towards the price of the gun.
I am interested in the following items:
Ruger SP101 in 9 mm.
S&W 547 (9mm).
Bolt action .223/5.56 rifle.
Lever action in .357 or .44 magnum
Revolvers...S&W, Ruger, or Colt.
Semi-autos...9 mm...preferably Glock, Springfield XD.
Colt Delta Elite 10 mm.
Feel free to ask about any other trades items.
SOLD!
Ingram M10A1 9mm (.45 ACP)
Military Armament Corporation
Stephenville, TX. USA
Serial # A604887
It was sold to me by former NRA president Sandra Froman (whom I met at Gunsite) and had previously belonged to her late husband, Bruce Nelson (famed leather/holster maker...designer of the "summer special" IWB).
It had never been fired when I received it.
I have fired less than 1000 rounds combined through the 3 barrels.
It originally came with a 4.5" barrel and top mounted cocking lever.
It used single feed Zytel (or steel) magazines.
It is only set up for 9mm but .45 ACP uppers are readily available.
I purchased a double feed bolt so that I could use Walther MP or older Cobray mags.
Also, since I am an old guy, I wanted optics on my Mac and purchased 2 uppers with side-cocking levers...it just went on from there.
I purchased an Uzi 9mm and have decided to part with my trusty Mac-10.
Here is a breakdown of prices for all the included accessories.
Accessories My Cost New
AWC 9mm suppressor $800
AWC Nomex cover $45
Side cocking upper (shorty with piccatiny rail) $230
Side cocking upper (10" with piccatiny rail, foregrip) $355
Double feed bolt assembly (for original metal mags) $159
Single feed Zytel magazines x 10 (35 each) $350
Original Cobray double feed magazines x 5-rare (70 ea) $350
Converted Walther MPK/MPL double feed magazines $60
Extended mag paddle release $20
2 piece receiver pin $30
AR Stock $50
Stock adapter $60
K-Grip $85
Tasco 1 x 30 red dot $42
Tasco ProPoint 1 x 26 red dot $72
Recoil buffers, set of 5 (currently sold in set of 3/$12.95) $13
I will also include a Cobray "swat case" and operating manual (not shown in photos).
Asking price for Mac-10 and all accessories: [STRIKE]$6000[/STRIKE] OBO.
SMG and suppressor are both transferable on a Form 4.
Feel free to send PM with any questions.
Thank you for looking.
I will consider trades towards the price of the gun.
I am interested in the following items:
Ruger SP101 in 9 mm.
S&W 547 (9mm).
Bolt action .223/5.56 rifle.
Lever action in .357 or .44 magnum
Revolvers...S&W, Ruger, or Colt.
Semi-autos...9 mm...preferably Glock, Springfield XD.
Colt Delta Elite 10 mm.
Feel free to ask about any other trades items.
Last edited: