Manual trimmer

[kenyo64]

What kind of manual trimmer do you use? Ease of holding brass, changing pilots or cutters .
Thanks
Ken

 

[42769vette]

What kind of manual trimmer do you use? Ease of holding brass, changing pilots or cutters .
Thanks
Ken

i use a old le wilson. its slow but precise

 

[ISP 5353]

Wilson

 

[U.S. Patriot]

Original Case Trimmer

 

[msd]

Manual, I use a Redding.
I've got 2 Lymans and an RCBS, and to me, found the redding the best so far for manual trimmers. Cutter blades seemed to stay sharper longer, and it holds the cases better.

 

[Eric86]

I use Trim Pro Manual Case Trimmer Kit with the 3 way cutter and the drill adapter. It saves me loads of time and works well for me.

 

[rimfire_crazed]

Zip Trim with three jaw chuck. The chuck makes it easier than using the lock studs and shellholder, but it still sucks.

On the plus side it is cheap.

I probably won't be agreeing with myself after i check and trim the 500 or so pieces of 30-06 brass I have sitting on my bench.

 

[kenyo64]

Thanks everybody for info, checked ebay and got a RCBS trim pro with neck brush, deburr tool, primer pocket tool, and flash hole tool
Ken

 

[snuffy33]

Lyman: Universal Case Trimmer Kit 9 Pilots

 

[lovemywoods]

Thanks everybody for info, checked ebay and got a RCBS trim pro with neck brush, deburr tool, primer pocket tool, and flash hole tool
Ken

Congrats on the new trimmer!

Here's a possible Christmas gift to yourself or let someone get it for you. It's an RCBS 3-way cutter that goes on the TrimPro. It does three steps (trim, deburr, chamfer) in one step. Saves lots of time!

Trim Pro Case Trimmer 3-Way Cutter 22 Cal