All right folks, with the introduction of a few new items at the last show, we have come to the realization that there are a few items that still take a bit more time to make. With that in mind, we are offering a limited-time-only pre-order sale on a few of our larger ticket items. Pricing is as follows:
4 paddle duelling tree - [STRIKE]REG $350[/STRIKE], PRE-ORDER $325
6 paddle duelling tree - [STRIKE]REG $475[/STRIKE], PRE-ORDER $440
100% IPSC Chest Flapper = [STRIKE]REG $275[/STRIKE], PRE-ORDER $250
Pricing is available to orders placed and paid in full by Wednesday, October 12th at 12:00PM EST. Items must be picked up at this upcoming 1500. All taxes apply.
This special is not available on the website. You must contact us either by PM, email, or phone. Either myself or Lisa can assist you on this deal.
And cause I am in a good mood, if you take advantage of this deal and pay in full by Sunday, October 9th at 6:00PM EST, you can take %10 off any additional in stock items added to your transaction. Additional items to be paid for at same time.
The items listed above are 3/8" AR500 targets. The torso, torso paddle, and tree paddles are all from this grade.
The upright on the trees are made from 2-1/2"x2-1/2"x3/8" angle, and the legs from 1/4" plate. Both items are standard A36 steel.
The AR500 surfaces are rifle rated. Standard rule of thumb is 100 yds for rifle and 10 yds for pistol. Always use your eye pro when shooting steel. As long as the rifle round is traveling below 3400-3500 ft/s you shouldn't see much more than a small pock mark. We have shot 3/8" AR500 with many calibers ranging from 17hmr to 50bmg, so if you have any specific caliber questions, please do not hesitate to ask! Rimfire will not operate the current revisions of these targets at this time.
The A36 is again, mild steel. The angle uprights will take most any handgun ammo without issue due to the orientation to the shooter, but rifle rounds will leave a mark. We have allotted for a solution to this if you choose. Our current revision trees include a single hole at the top of the tree on each face. This allows, at the buyers discretion, to attach either AR400 or AR500 slats to the strike face of the angle. This can either be done from the get go, or can be added at a later date if you decide you need it.
Paddles on the trees are interchangeable/replaceable if you ever want to try something different.
We look forward to hearing from you!!
4 paddle duelling tree - [STRIKE]REG $350[/STRIKE], PRE-ORDER $325
6 paddle duelling tree - [STRIKE]REG $475[/STRIKE], PRE-ORDER $440
100% IPSC Chest Flapper = [STRIKE]REG $275[/STRIKE], PRE-ORDER $250
Pricing is available to orders placed and paid in full by Wednesday, October 12th at 12:00PM EST. Items must be picked up at this upcoming 1500. All taxes apply.
This special is not available on the website. You must contact us either by PM, email, or phone. Either myself or Lisa can assist you on this deal.
And cause I am in a good mood, if you take advantage of this deal and pay in full by Sunday, October 9th at 6:00PM EST, you can take %10 off any additional in stock items added to your transaction. Additional items to be paid for at same time.
The items listed above are 3/8" AR500 targets. The torso, torso paddle, and tree paddles are all from this grade.
The upright on the trees are made from 2-1/2"x2-1/2"x3/8" angle, and the legs from 1/4" plate. Both items are standard A36 steel.
The AR500 surfaces are rifle rated. Standard rule of thumb is 100 yds for rifle and 10 yds for pistol. Always use your eye pro when shooting steel. As long as the rifle round is traveling below 3400-3500 ft/s you shouldn't see much more than a small pock mark. We have shot 3/8" AR500 with many calibers ranging from 17hmr to 50bmg, so if you have any specific caliber questions, please do not hesitate to ask! Rimfire will not operate the current revisions of these targets at this time.
The A36 is again, mild steel. The angle uprights will take most any handgun ammo without issue due to the orientation to the shooter, but rifle rounds will leave a mark. We have allotted for a solution to this if you choose. Our current revision trees include a single hole at the top of the tree on each face. This allows, at the buyers discretion, to attach either AR400 or AR500 slats to the strike face of the angle. This can either be done from the get go, or can be added at a later date if you decide you need it.
Paddles on the trees are interchangeable/replaceable if you ever want to try something different.
We look forward to hearing from you!!
Last edited:
