**TRADED**
I'm in New Haven.
Willing to meet halfway up to one hour away.
Buyer must be legal to own firearms.
All local/state/federal laws apply.
STI 2011 10mm 5" bull barrel
Sale includes 1 factory STI 15rd flush fit mag.
$2000
*If there is no interest in a few weeks, after I start doing my own cerakote, it will get cerakoted and relisted at a higher price. I have way more labor and elbow grease into this gun than the price reflects (like somewhere in the neighborhood of at least 70-80 hours, not joking).
***Trade Interests***
- 9mm PCC in a pistol configuration with around a 4-5" threaded barrel for a suppressor host. Specifically, something piston driven or roller delayed blowback design. Two listed below are main interests though.
- MPX-K or Copperhead-K with the shorted threaded barrel (around 4" barrel I believe).
- Century AP5-P with 5" threaded barrel
- P320 Carry or Compact in 9mm, non-manual safety (mainly a plain base model, not a super Gucci version)
- Open to other offers for something in 9mm. I like Sigs and 1911's. Maybe an HK or Canik Mete?
I'm in New Haven.
Willing to meet halfway up to one hour away.
Buyer must be legal to own firearms.
All local/state/federal laws apply.
STI 2011 10mm 5" bull barrel
- Gun was originally a factory .40 short block from STI (slide, frame, barrel) and then reamed to 10mm
- I purchased from AllenM and finished the rest as cataloged in this thread: https://www.indianagunowners.com/threads/custom-2011-builds.544187/
- 35 rounds fired with 180gr FMJ (Ammo Inc, Blazer)
- Cycles well, strong ejection
- Optic ready (Deltapoint Pro footprint)
- Most of the internals are EGW
- Slide stop is 10-8 Performance
- Wilson ambi safety
- Wolff 25lb main spring, 20lb recoil spring
- All parts installed/fitted/blended by me.
- All machining was performed by me (except initial frame to slide and barrel fitting, that was STI and the fit is excellent, nice and tight).
- Trigger pull is around 3.25lbs, excellent and crisp (EGW ignition parts).
- Finish is rust blued using Mark Lee Express Blue #1. It has a patina look, with some areas grey and some areas brown. It was my first time rust bluing and not perfect. I did the best I could to show this in the pictures. There are more pictures in the build thread.
Sale includes 1 factory STI 15rd flush fit mag.
$2000
*If there is no interest in a few weeks, after I start doing my own cerakote, it will get cerakoted and relisted at a higher price. I have way more labor and elbow grease into this gun than the price reflects (like somewhere in the neighborhood of at least 70-80 hours, not joking).
***Trade Interests***
- 9mm PCC in a pistol configuration with around a 4-5" threaded barrel for a suppressor host. Specifically, something piston driven or roller delayed blowback design. Two listed below are main interests though.
- MPX-K or Copperhead-K with the shorted threaded barrel (around 4" barrel I believe).
- Century AP5-P with 5" threaded barrel
- P320 Carry or Compact in 9mm, non-manual safety (mainly a plain base model, not a super Gucci version)
- Open to other offers for something in 9mm. I like Sigs and 1911's. Maybe an HK or Canik Mete?
Last edited: