Target Stand

[DarkEyes]

I got bored today and decided to build a new target stand. My old one was made of wood, a little heavy, and full of holes. I decided to make this one out of 3/4" PVC. I did not glue any of it so I can break it down and transport it in my car, and replace pieces that might get shot. All said and done it cost me just under $15 and I have 10' of PVC left for patch work.
I need to get some more 6" Shoot*N*C targets.

Target stand

Target on stand

PS
Why can I not post images from my dedicated server? Only link to them.

 

[wallotcorydon]

sweet......I have been kicking around building a target stand or 2, but was thinking about using 2x4's that I have laying around. I think I like this set-up a little better. What are the dimensions of the stand, and the base?

 

[Icarry2]

When you copy and paste the URL into the image insert window you have to make sure it doesn't look like this..

http://http//bryanarthur.doesntexist.org/misc.image/DSCN2753.JPG

see the two sets of http:// at the front..


Cool stands by the way

 

[DarkEyes]

sweet......I have been kicking around building a target stand or 2, but was thinking about using 2x4's that I have laying around. I think I like this set-up a little better. What are the dimensions of the stand, and the base?

The base is 3/4"pvc 18"X18" to center and same on the other side..
The target area is 3/4"pvc 18"X18" square..
The head target part is 3/4"pvc 8"X8" square..
With that you can adjust the height to what ever but if you get much over 36" its going to woble...

 

[DarkEyes]

 

[DarkEyes]

When you copy and paste the URL into the image insert window you have to make sure it doesn't look like this..

http://http//bryanarthur.doesntexist.org/misc.image/DSCN2753.JPG

see the two sets of http:// at the front..


Cool stands by the way

I think i got it now... but i had to use the ip rather than the dns oh well
Thanks