***OFFICIAL Ingo Lower AR Build Thread***

[w_ADAM_d88]

Don't feel bad... I was on the first group by and I haven't finished mine either. The lower is complete just need to get an upper. Funding is not available at the moment, especial after the latest set back and hospital bills starting to roll in. Plus haven't really decided which caliber I want to go with.

 

[OneBadV8]

Don't feel bad... I was on the first group by and I haven't finished mine either. The lower is complete just need to get an upper. Funding is not available at the moment, especial after the latest set back and hospital bills starting to roll in. Plus haven't really decided which caliber I want to go with.

Mine are still in the box. I hope to get to them in 2018.

 

[Ballstater98]

Mine are still in the box.

Funds & lack of decisions.

 

[jzwhts]

Don't feel bad... I was on the first group by and I haven't finished mine either. The lower is complete just need to get an upper. Funding is not available at the moment, especial after the latest set back and hospital bills starting to roll in. Plus haven't really decided which caliber I want to go with.

Mine in the safe also. Priorities and I know your funds are going to the right place right now.

 

[Ericpwp]

Mine is waiting to be blessed.

 

[RustyHornet]

#60 is born again! Was built up exactly like this, but with PSA parts. Had a little tiff with them, so I sold off everything bearing their name and upgraded. BCM upper and enhanced LPK, RRA stock and hand guard. Extremely happy, can't wait to get her out!

View attachment 53944

 

[LockStocksAndBarrel]

#60 is born again! Was built up exactly like this, but with PSA parts. Had a little tiff with them, so I sold off everything bearing their name and upgraded. BCM upper and enhanced LPK, RRA stock and hand guard. Extremely happy, can't wait to get her out!

View attachment 53944

Niiiiice!

 

[T-DOGG]

 

[RustyHornet]

Not bad for #59.

Looks really good, DOGG.

 

[boogieman]

Here is #220

[/IMG]

 

[jasonh31]

Still in box also Probably not going to be done anytime soon.

 

[churchmouse]

Both of mine are done up and running.
1 is a pistol in .223 and the other is 16"
No pics as of now on the pistol.

 

[Ballstater98]

Brought #114 to life today in 5.56 with a 16". I wanted to do a Hoosier build, but a 100% build is impossible. I decided to take the BCI Defense Build Class and pop my AR cherry. Since they manufacturer a majority of the parts here in IN, this was as close as I was going to get anyway. Also got my dust cover on too.

 

[rob63]

Brought #114 to life today in 5.56 with a 16". I wanted to do a Hoosier build, but a 100% build is impossible. I decided to take the BCI Defense Build Class and pop my AR cherry. Since they manufacturer a majority of the parts here in IN, this was as close as I was going to get anyway. Also got my dust cover on too.

View attachment 55092

View attachment 55095

Looks great! Cool that you used as many Hoosier made parts as possible.

 

[lovemywoods]

Brought #114 to life today in 5.56 with a 16". I wanted to do a Hoosier build, but a 100% build is impossible. I decided to take the BCI Defense Build Class and pop my AR cherry. Since they manufacturer a majority of the parts here in IN, this was as close as I was going to get anyway. Also got my dust cover on too.


View attachment 55095

Nice clean lines! Well done.

 

[Principal Skinr]

I finally built mine! I'll be likely adding a Trijicon MRO to this, eventually. If not, maybe a Vortex UH1. It has a Palmetto State Armory CHF middy upper (FN barrel), a PSA premium BCG, Magpul MOE SL furniture (+BUIS) in stealth grey, a PSA LPK, and an M-Lok sling ring (not shown). I may try to put the first few rounds down the pipe tomorrow. I'll also add a couple better pics soon.

 

[shooter521]

#200 is still sitting in my safe, untouched. No idea what I'm going to do with it. I am getting a Franklin Armory BFSIII trigger pack that I'll need to drop into something, so maybe I'll just build a cheap "burner" upper to go on the INGO lower. Too bad we didn't get these with the third selector position engraved (I always thought that was stupid, until I had need for it!).

 

[lonehoosier]

It's done. Took me long enough



AR pistol parts list & prices

INGO lower $100
PSA lower parts kit $70
PSA pistol buffer, tube & spring used $30
PWS Castle nut end plate $35
LawTactical folding stock $219
SigBrace SBM4 $109
PSA 10.5 upper $229
Knights Armament Rail $225
INGO dust cover $17
PSA bolt carrier group $80
Raptor ambi charging handle $81
RRA rear sight used $85
Magpul MS4 sling $45
Elzetta light mount $26
Surefire light G2X LE $55

Total $1,406

And now to save up for this. A perfect addition to my Law Tactical Folding buffer tube.

[video=youtube_share;TDREsLirGyw]http://youtu.be/TDREsLirGyw[/video]

 

[jfed85]

Finally got mine "finished" from group buy #1

I say "finished" because I ultimately want a scope and bipod on this one just for the fun of it.

Went with a Toms Tactical lower build kit with nickel teflon trigger group.
magpul CTR stock and grip.
Palmetto State Armory 18 inch keymod upper in 223 Wylde
bushnell TRS-25 mounted on it for now just to get an optic on it to shoot it before I decide which scope/bipod I want.

 

[DanVoils]

I still have 2 in the safe from the 2nd run. Sequential numbers but not sure what I want to do with them.