Lee LoadMaster Progressive Press - Sold
Sold Lee Load Master progressive press. I have to downsize. It is what it is.
Press comes with: case feeder, Large and Small Primer Feeder,
shell plates for 45ACP and 223, Pro Auto-Disk Powder Measure,
2 5 hole turret heads. $150.00 Located in...
Here is a place in northern Indiana that is just starting out with powders, RCBS and Hornady equipment.
Plymouth True Vaue > Home
I have been watching as they grow their firearms, muzzle loading and reloading section. they are a distributor of Bremen's BCI AR-15 and parts as well...
2000 pieces of once fired, cleaned, deprimed, twice tumbled 40SW. Ready to reload. I have 4 bags of 500 each. $25.00/500. I will consider trades for 223 rem brass. FTF only. South Bend/Plymouth area.
Grand kids are older, they prefer the 9mm and 45 now. this 22LR semi auto is in good condition, had trigger work performed on it and has several hundreds of enjoyable rounds through it. Pistol comes with three magazines. The proceeds from this sale will go to a 9mm target pistol the grand kids...
I currently use a Harbor Freight propane burner/stove to melt lead with. It works fine but it's slow and on breezy or windy days the flame can get blown out. I've considered a turkey fryer base. I also have a line on an old plumbers furnace that mounts atop a propane cylinder. I'm wondering...
I have tried to work with the stock sights on my G3 model 26 for two years. I give up.
there are dozens of after market sights out there, they are no doubt better than stock. I really don't need glow in the dark, laser range finding, tactical feed back, micro chip compatible sights.
I also...
I'm considering getting a Tokarev TTC-30 7.62x25mm. They sound like an impressive handgun. So, I'm looking for opinions-good, bad, ugly, whatever.
I'll start reloading this caliber if I get one. Any issues in reloading this? I'm guessing brass might be a problem, dunno. let's hear it!
That's what I'm looking for. I tried 5.2gr of HS-6 with a 120gr LRN, oal is 1.096. This was a smooth shooter but I had issues with accuracy after 60-70 rounds. It's also fouling pretty bad. I figure the accuracy is partly due to lack of good obturation resulting in leading the barrel. The...
I'm considering getting a custom mold to satisfy my reloading addiction. I would like a profile that I haven't seen in the catalogs. any recommendations? They're all more expensive but I view it as an investment.
Last year I started casting my 9mm bullets due to the shortage of cheap plated bullets. I use the Lee 4 die set with no problems on plated or jacketed bullets. When I use cast bullets the FCD will drag as I remove the finished cartridge. I have found the OAL increases slightly after crimping...
I now have my first wheel gun :):
this one was born in 1955 before the name changed to model 28. the revolver is nothing fancy, insert bullets, pull trigger, BANG. I'll be casting and reloading this in 38SP and 357MAG. I stand before you, Masters of the Revolvers and ask for advice and trivia...
Tomorrow morning I will be the proud owner of a inline 50cal muzzleloader rifle. :rockwoot:
I don't really know much about them. I've shot a few times with friends and that's about it. I need your advice on any books to introduce me to these new toys. Also, where I can purchase supplies...
This is for all of us Hoosiers. Today's action in Washington, today's votes. These really ticked Obama off:
U.S. Senate Roll Call Votes 113th Congress - 1st Session (2013)
Amendment Number: S.Amdt. 714 to S. 649 (Safe Communities, Safe Schools Act of2013)
Statement of Purpose: To...
I have some odds and ends here that I won't use. FTF is preferred.
100 SPEER Hot-Cor 270 cal .277"dia 150gr spitzer $12.00
100 SIERRA .41 cal 410"dia 220gr silhouette $15.00
53 SIERRA 2155 Match King 30 cal .308"dia 155gr HPBT $15.00
56 SIERRA 2145...
Reloading equipment is just as scarce as ammunition these days. If you can gather the material and equipment, here is my cost break down on bullet cost:
Plated 9mm 124gr = $0.125
Primer =$0.035
powder =$0.02
new brass =$0.35
One reloaded 9mm bullet cost: $0.53
Reuse your brass...
I've been reloading for a short while now and have used A#5 and Win 231. I tried Clays the other day and found it hard to meter consistently. I'm using a Lee Auto Disk with the Pro upgrade. The Clays looks bulkier than #5. I checked each round on the scale before assembly just to insure I...
I had issues with Selliers & Bellot large pistol primers. I used these in .45 Colt and a Rossi Circuit Judge. 5 rounds, 3 clicks, 2 bangs. Sometimes worse. I trimmed the firing pin spring and got the same results.
Today I got a pack of Winchester WLP and a pack of CCI 300 primers and...
Sold pending funds receipt
I have a Lee Precision Reloader Press NIB available.
This is a great addition to your reloading bench for a decapping or sizing die. Also for the Lee Precision Lead Hardness Test Kit.
I paid $32.00+tax for it. If you're interested PM me, lets talk.
I'm trying to wrap my head around the various factors in casting and loading lead. I've heard the quick formula: "Take the hardness of an alloy, add two to the number, put two zeros on that, and you will have the approximate range you can shoot velocity wise." I average 875fps with 124gr PBRN...