redneckmedic
Grandmaster
My brother and I started buying parts for this paired build back in Sept... here are the results:
Mega Upper/Lower Receivers
DPMS LPK
DPMS 20" Fluted 1:10 Barrel
APEX 6550 handguard
A2 buttstock
Wotac 4-14x50
We took our new builds out to 42769vette's Shooting Farm yesterday for the honeymoon. We (RNM, RNP, IGW, & Vette) were looking to put a few hundred rounds down range for a little break-in, however some family affairs brought us back to Indy and cut the day short. Here is a simplified range report.
Anyone looking at getting into a nice .22lr set up should seriously consider the CZ452, while we were setting up IGW was consitantly hitting the 4" plates at 220 and 250 with a federal bulk 550 pack (about 300 rounds).
We shot factory 168 Amax at about 3/4 MOA, still doing load development but looks like so far she likes around +/- 37.~ vaget with the 168 amax. I couldn't get a constant reading on the chrono since RedneckPastor hit the chrono on his second shot through it and I hit it on my first
After IGW walked us in hits on a Bobcat Steel 12" Square was almost 100% per trigger pull, and even hitting the 4" round wasn't too tough.
Towards the end of the day RNP and IGW shot the 100% IPSC at 750 with about 50% hits, RNP with his new 308 and IGW with his .223 w/ acog, even with the 30mph wind gusts.
Prebuild
My wotac didn't arrive yet (back order) so 42769vette let me borrow his Swarovski from the torture test demo, probably some of the best glass I've ever looked through. (you can still see the shot pimpling on the scope)
Custom Airbrust to the stocks.
RNP shooting.
More range report to come.
Mega Upper/Lower Receivers
DPMS LPK
DPMS 20" Fluted 1:10 Barrel
APEX 6550 handguard
A2 buttstock
Wotac 4-14x50
We took our new builds out to 42769vette's Shooting Farm yesterday for the honeymoon. We (RNM, RNP, IGW, & Vette) were looking to put a few hundred rounds down range for a little break-in, however some family affairs brought us back to Indy and cut the day short. Here is a simplified range report.
Anyone looking at getting into a nice .22lr set up should seriously consider the CZ452, while we were setting up IGW was consitantly hitting the 4" plates at 220 and 250 with a federal bulk 550 pack (about 300 rounds).
We shot factory 168 Amax at about 3/4 MOA, still doing load development but looks like so far she likes around +/- 37.~ vaget with the 168 amax. I couldn't get a constant reading on the chrono since RedneckPastor hit the chrono on his second shot through it and I hit it on my first
After IGW walked us in hits on a Bobcat Steel 12" Square was almost 100% per trigger pull, and even hitting the 4" round wasn't too tough.
Towards the end of the day RNP and IGW shot the 100% IPSC at 750 with about 50% hits, RNP with his new 308 and IGW with his .223 w/ acog, even with the 30mph wind gusts.
Prebuild
My wotac didn't arrive yet (back order) so 42769vette let me borrow his Swarovski from the torture test demo, probably some of the best glass I've ever looked through. (you can still see the shot pimpling on the scope)
Custom Airbrust to the stocks.
RNP shooting.
More range report to come.