ONLY 200rds left.....
Yes, the name is gimmicky, but the components are from known companies. C.O.P. 140gr solid copper hollow points. US made. This is made by General Bullet using solid copper hollow points with starline brass and is similar to the Barnes solid copper hollow point. This sold at Midwayusa.com in 2011 for $14.99 a box.
I have (8) 25rd boxes avail. Price is $60 FIRM for all eight boxes. This is what you would pay for practice ammo.
Trade value closer to $10 a box but I am not going to fight over a few bucks either way. Lets go off Midway or SGammo pricing on trades.
I am looking for the following ammunition-
5.56, 7.62x39, 7.62x51, 9mm, 45acp, 380 acp.
Will consider AK magazines, Gen M3 Pmags, Glock 19 mags, Checkmate M1a 20rd magazines.
-------------------------------------
I stole this data on .45acp C.O.P. from the Smith and Wesson forum. If I was going to keep my .40 I would carry this without reservation.
Bullets 'zero' and 1 were shot into bare waterjugs.*Bullet*2*was shot thru a medium-clothing layer of denim/2 terrytowels/denim. Bullet 3 passed thru a thicker layer of denim/4 terrytowels/denim. Since these bullets looked so good and I had enough waterjugs, I then tried one thru my thickest pad yet, denim/8 terrytowels/denim. As you can see, not even 10 layers significantly reduced the expansion of this bullet. All 4 bullets entered waterjug #3, with the last-2 bullets cracking the rear wall of jug 3.
The width of each of the 1st-4 bullets was about 0.8", while the 5th ('4') was about 0.78".
-------------------
Yes, the name is gimmicky, but the components are from known companies. C.O.P. 140gr solid copper hollow points. US made. This is made by General Bullet using solid copper hollow points with starline brass and is similar to the Barnes solid copper hollow point. This sold at Midwayusa.com in 2011 for $14.99 a box.
I have (8) 25rd boxes avail. Price is $60 FIRM for all eight boxes. This is what you would pay for practice ammo.
Trade value closer to $10 a box but I am not going to fight over a few bucks either way. Lets go off Midway or SGammo pricing on trades.
I am looking for the following ammunition-
5.56, 7.62x39, 7.62x51, 9mm, 45acp, 380 acp.
Will consider AK magazines, Gen M3 Pmags, Glock 19 mags, Checkmate M1a 20rd magazines.
-------------------------------------
I stole this data on .45acp C.O.P. from the Smith and Wesson forum. If I was going to keep my .40 I would carry this without reservation.
Bullets 'zero' and 1 were shot into bare waterjugs.*Bullet*2*was shot thru a medium-clothing layer of denim/2 terrytowels/denim. Bullet 3 passed thru a thicker layer of denim/4 terrytowels/denim. Since these bullets looked so good and I had enough waterjugs, I then tried one thru my thickest pad yet, denim/8 terrytowels/denim. As you can see, not even 10 layers significantly reduced the expansion of this bullet. All 4 bullets entered waterjug #3, with the last-2 bullets cracking the rear wall of jug 3.
The width of each of the 1st-4 bullets was about 0.8", while the 5th ('4') was about 0.78".
-------------------
Last edited:
