I have 5 2011 builds currently going on. this one is almost done. Final assembly to be done by the owner but I have paint on it just no pic in color yet
I love this gun it feels awesome.
Infinity sight tracker upper mated to Phoenix trinity 2011 lower with aluminum grip.
Slide, frame and barrel lugs were over sized and had to be fit.
after slide and frame fit making a lug measurement
Cutting lugs
checking to make sure both lugs contact evenly
cutting the wilson/nowlin frame to accept a Para/Clark barrel
everything in place
Rear Serrations each serration .015 progressively closer
Doing a "hi Power" or "carry cut" whichever you prefer to front of the gun also did a shallow cut in the lower dust cover at the point where a government frame would end
I love this gun it feels awesome.
Infinity sight tracker upper mated to Phoenix trinity 2011 lower with aluminum grip.
Slide, frame and barrel lugs were over sized and had to be fit.
after slide and frame fit making a lug measurement
Cutting lugs
checking to make sure both lugs contact evenly
cutting the wilson/nowlin frame to accept a Para/Clark barrel
everything in place
Rear Serrations each serration .015 progressively closer
Doing a "hi Power" or "carry cut" whichever you prefer to front of the gun also did a shallow cut in the lower dust cover at the point where a government frame would end
Last edited: