AR-15 and M-16 Show And Tell

[teddy12b]

I don't know where this pic came from but I'd like to know how accurate the top two uppers are.

 

[1donos]

I don't know where this pic came from but I'd like to know how accurate the top two uppers are.

top picture is a stock mid length rock river 458 socom ... never fired it
Middle one is a bravo company w/ daniel defense 5.56 ... very accurate
bottom is a rock river operator 458 socom ... seems accurate so far, just put scope on it last week.

 

[teddy12b]

Oh ok, I was kinda hoping they were bull barreled 5.56's. I'm trying to find just the right upper for a compact precision rig in the future. I've got the lower, but still searching for that perfect upper.

 

[WaltherFan]

Looks great

 

[N_K_1984]

I'm diggin' that bravo company daniel defense combo...

PIC THREAD:

 

[Reggywill]

My Ruger 556E and some other goodies. Just getting started so no red-dot or front rails yet, but it's one bada$$ gun to shoot.

 

[Mad Anthony Wayne]

My turn to play This is my new AR15 pistol I've been putting together. Soon to be SBR.

-RRA pistol lower
-RRA upper receiver
-RRA BCG and charging handle
-ER Shaw 7.5" heavy barrel that's had the gas port slightly opened
-YHM carbine length free float quad rail

Other accessories:

-Eotech 552 model NV compatible
-Magpul Gen2 MBUS
-Magpul BAD lever
-Magpul MIAD grip
-Magpul Pmags with Ranger floorplates
-FAB Defense magwell grip
-635nM pressure pad operated green laser
-Larue index clips for rail protection and indexing accessories

Reliability upgrades:

-Noveske KX3 piggy brake
-MGI D-Fender D ring over extractor spring increasing extraction by 400%
-H-2 Heavy Buffer

Future additions:

-RRA operator stock
-Accutact anglesight for shooting behind cover. If you haven't seen these, here's a link.
-Sig Sauer or Crimson Trace foregrip with light and laser.

 

[JonProphet]

Did you build the lower yourself? That looks like a stainless LPK. There are only a few SS LPK on the market & I've been wondering how those are working out for people.

As someone already said, it's an alg trigger group. No I didn't build the lower, it was a complete gun purchase from Olympic firearms. I just bolted on the new hardware.

 

[Gabriel]

 

[bartonmd]

Got my deer rifle finished up, last week, and slung some copper down range... I haven't had this much of a "big block grin" about anything since I picked up my CBR1100XX over 80k miles ago! This thing is a hoot to shoot!

It's a:
Rock River .458 SOCOM CAR upper
Palmetto State Armory lower
Spikes standard LPK with Bill Springfield trigger
Hogue grip
Magpul MOE stock with extended rubber buttpad
Daniel Defense Burnsed Loop receiver end plate sling mount
LaRue Tactical LT-104 VFZ mount
Leupold VX-1 3-9x40 matte with LR reticle (and Butler Creek caps)
Mags are standard mil-spec 30rd (hold 10rds of .458) with Magpul followers, and I just beveled the front of the mag.

I didn't take any pictures (I know, I know), but I was very nearly clover-leafing 5-shot groups at 100yds from a bench.

 

[Hop]

Got my deer rifle finished up, last week, and slung some copper down range... I haven't had this much of a "big block grin" about anything since I picked up my CBR1100XX over 80k miles ago! This thing is a hoot to shoot!

It's a:
Rock River .458 SOCOM CAR upper
Palmetto State Armory lower
Spikes standard LPK with Bill Springfield trigger
Hogue grip
Magpul MOE stock with extended rubber buttpad
Daniel Defense Burnsed Loop receiver end plate sling mount
LaRue Tactical LT-104 VFZ mount
Leupold VX-1 3-9x40 matte with LR reticle (and Butler Creek caps)
Mags are standard mil-spec 30rd (hold 10rds of .458) with Magpul followers, and I just beveled the front of the mag.

I didn't take any pictures (I know, I know), but I was very nearly clover-leafing 5-shot groups at 100yds from a bench.

Awesome! 458 SOCOM is a blast to shoot from an AR.

 

[bartonmd]

Awesome! 458 SOCOM is a blast to shoot from an AR.

Yeah, I know! I seriously thought I was just getting a deer rifle, but this thing is awesome to shoot! I had to pick up some Hornady 300gr HP bullets for it, because I now want to shoot it more than what I'm willing to spend on $1/each Barnes bullets!

Mike

 

[HICKMAN]

yeah, like 7 posts up!

the one with what looks like a sock on the buffer tube

 

[gixer454]

Here is my SPR/3 Gun build in process, 18" 1-7 twist ER Shaw Barrel, Model 1 upper, DPMS BCG & charging handle, Clark Carbon Fiber Handguard, Double Star lower (for now),RRA grip, Magpul CTR stock, Nikon M-223 Scope and mount, Custom Trigger job with JP 4.5 lb springs. A Miculek compensator is in the mail. Group is 100 yds with Winchester White Box, just to get the scope back on target.

 

[AuburnGuy]

Christmas Present from my wife. Don't laugh... I know it isn't up to many's standards. My first AR, and building a second.

Bushmaster Carbon 15. Magpul Front and Rear BOS Gen2. Magpul Stock, Magpul Maid Grip, Magwell Grip, and Magpul Pmags.

Wife bought me most of the accessories too for Valentines Day. I can't fault her for trying I do love the gun though, just most people laugh...

 

[kwood]

Christmas Present from my wife. Don't laugh... I know it isn't up to many's standards. My first AR, and building a second.

Bushmaster Carbon 15. Magpul Front and Rear BOS Gen2. Magpul Stock, Magpul Maid Grip, Magwell Grip, and Magpul Pmags.

Wife bought me most of the accessories too for Valentines Day. I can't fault her for trying I do love the gun though, just most people laugh...

hey man congrats
got to start somewhere and if your wife is taking the initiative and getting you one....cant beat that

 

[tdkahn]

First AR build.

 

[teddy12b]

First AR build.

What upper is this?

 

[sumphead]

Bushmaster, XM15e2s gas piston
Leupold Mark-AR
Burris P.E.P.R. mount
You may have seen it my duracoat thead, but subtle black snake finish.
Awesome shooter!

 

[tdkahn]

What upper is this?

Wilson Arms. 18" Mid Gas System 223 Wylde Chambered 1x8 twist SS Bull Barrels. These are of the highest quality and will rival the Rock River varmint barrels without question. We have put this barrel on a Flat Top Upper with a Midwest Industries SS9 Free Float tube and a single rail gas block. The upper is complete with bolt/carrier assy and charging handle.

The upper comes with the standard 1 year warranty against manufacturer defect.

Got it from JSE Surplus: Custom Wilson Arms 18" 1x8 223 Wylde Mid Gas System Bull Barrel Upper MI SS9 Free Float