AR-15 and M-16 Show And Tell

[rkwhyte2]

My latest build: Aero M4E1 lower, Aero LPK, LaRue MBT trigger, PSA 16" Dissipator upper, Rainer BCG,Generic charging handle. Just need a rear sight and an optic.

 

[MindfulMan]

That looks like a really solid build, Vinny. I love those LaRue triggers..... good choice !

 

[RMG]

My newest get home pdw build. 300blk

I like, a lot. Nicely done, sir, nicely done.

 

[Ggreen]

In a complete departure from my short barrel addiction.
Fortis ambi receiver set, 17.7 ba barrel

 

[rkwhyte2]

In a complete departure from my short barrel addiction.
Fortis ambi receiver set, 17.7 ba barrel

Very nice setup.

 

[Riflemen14]

Looks awesome! Like the mid-evil looking rail and muzzle device set up. Is it a Hansen barrel? Very nice

 

[Ggreen]

Looks awesome! Like the mid-evil looking rail and muzzle device set up. Is it a Hansen barrel? Very nice

Yes it's the Hansen 3 gun barrel. The flash hider is a surefire 3p. The rail is a little extreme for my tastes, but it matches the reciever

 

[Ggreen]

My new safe got delivered today so I had a rare opportunity to get some of my rifles piled up.. I may need hoarders...

 

[tcecil88]

My new safe got delivered today so I had a rare opportunity to get some of my rifles piled up.. I may need hoarders...

That's a good start anyway..........

 

[Steel and wood]

8350004[/URL]]My new safe got delivered today so I had a rare opportunity to get some of my rifles piled up.. I may need hoarders...

That is a great family photo, but your new short build is just cool. Nice job.

 

[SPOOK331945]

Finished up my .50 beowulf build last night.

 

[T-DOGG]

Specs:

Ballistic Advantage lower receiver
Daniel Defense LPK
BCM PNT trigger group
Aero Precision Buffer tube w/BCM hardware
Daniel Defense buffer spring and H buffer
Daniel Defense tornado grey stock & grip

BCM upper receiver
BCM BCG
BCM charging handle
BCM 16" 5.56 mid-length BFH enhanced lightweight barrel (0.625 gas block journal, cold hammer forged, chrome lined, MP & HP tested, 1:7 twist)
BCM gas block and tube
standard A2 flash hider
Daniel Defense 12" Slim keymod handguard in tornado grey
Daniel Defense VFG in tornado grey

Magpul MBUS pro back up sights
Streamlight ProTac rail mount 2 flashlight
Trijicon Accupoint 1-4 red triangle post reticle
Bobro QD scope mount

​

 

[teddy12b]

Specs:

Ballistic Advantage lower receiver
Daniel Defense LPK
BCM PNT trigger group
Aero Precision Buffer tube w/BCM hardware
Daniel Defense buffer spring and H buffer
Daniel Defense tornado grey stock & grip

BCM upper receiver
BCM BCG
BCM charging handle
BCM 16" 5.56 mid-length BFH enhanced lightweight barrel (0.625 gas block journal, cold hammer forged, chrome lined, MP & HP tested, 1:7 twist)
BCM gas block and tube
standard A2 flash hider
Daniel Defense 12" Slim keymod handguard in tornado grey
Daniel Defense VFG in tornado grey

Magpul MBUS pro back up sights
Streamlight ProTac rail mount 2 flashlight
Trijicon Accupoint 1-4 red triangle post reticle
Bobro QD scope mount

​

I like the thought you put into that rig. That thing looks sweet! How's it shoot?

 

[T-DOGG]

I like the thought you put into that rig. That thing looks sweet! How's it shoot?

Thanks! It came out better than I had originally envisioned.

I have not shot it yet, hoping that will come soon.

 

[Ggreen]

Finished up my .50 beowulf build last night.

Does it eject right? My factory beos ejection ports were milled out beyond the dust cover detent. Alexander's don't even come with the covers.

 

[SPOOK331945]

Does it eject right? My factory beos ejection ports were milled out beyond the dust cover detent. Alexander's don't even come with the covers.

Yep, I've yet to have any issues

 

[Ggreen]

Yep, I've yet to have any issues

That's the only one I've seen with a dust cover that works. Mine always get the dremel to remove the whole inner diameter of the ejection port then I usually filed off the door hinge tabs. I need another beowulf, but my next one is going to be a factory Alexander again. Too many headaches with the 12.7 off brand.

 

[SPOOK331945]

That's the only one I've seen with a dust cover that works. Mine always get the dremel to remove the whole inner diameter of the ejection port then I usually filed off the door hinge tabs. I need another beowulf, but my next one is going to be a factory Alexander again. Too many headaches with the 12.7 off brand.

I've had really good luck with this one. Now I'm curious if it could be a proprietary dust cover. I'll have to compare it to a standard this weekend. Only thing I've had to do it clean up the inside of the barrel extension. When the locking lugs were broached, it left a heck of a burr. After I did that it started feeding the flat nose 500 grain stuff with no problem.

 

[Ggreen]

I've had really good luck with this one. Now I'm curious if it could be a proprietary dust cover. I'll have to compare it to a standard this weekend. Only thing I've had to do it clean up the inside of the barrel extension. When the locking lugs were broached, it left a heck of a burr. After I did that it started feeding the flat nose 500 grain stuff with no problem.

It was constant issues with one of my 12.7 uppers. Wouldn't feed reliably, over gassed, inconsistent ejection.. I was so disheartened I had another brand 12.7 that just sat in the safe unshot. Everytime I shoot an Alexander 50beo i want another, everytime I shoot a 12.7 I want to get rid of it. I just need to spend the money on a factory aa beowulf again and keep it. I love the round

 

[BR8818]

Took the picture for another thread figured I'd post it here also.