Mostly looking to sell. Might consider the right trade. Thinking about a Kel-Tec Sub2k Gen 2 in 9mm G19 or 17 mags. Or a Surefire weapon light. But shoot me offers if you want. Worst I can do is say no thanks.
Located in Plainfield. Don't want to travel far. Will ship on your dime.
Prices are pretty firm. Text (219)688-8679 for quickest response or more pictures of anything.
Picture 1
1.1 BCM BLEM upper: Sold $50
*Mostly assembled. Missing the little E-clip for the dust cover.
*There are a few very minor scratches on the top rail and around the CH area.
*With the barrel I have, the fit is VERY tight. I had to use a blow dryer to heat it up to insert the barrel, and same to get it out. I can't say with any certainty if this lies with the barrel or upper, but I think it's the upper. It works just fine, just be aware of the tight fit.
1.2 BCM BCG: $150
*This might have like 60 or so rounds though it. It might be unfired. I honestly can't remember if I shot it. Was installed in a gun at least.
1.3 BCM Complete Lower Sold - Posted in Long Guns Classifieds. https://www.indianagunowners.com/fo...uns/425810-factory-bcm-lower.html#post6822371
Picture 2
2.1 BCM Barrel: $165
*New
*Specs: 14.5 inch, Midlength, Light weight, Standard (not BFH)
*See disclaimer on 1.1
2.2 BCM KMR Alpha 13: Sold $150
*Was installed on rifle, but you'd hardly know it. VERY good condition.
*Comes with all hardware including a brand new barrel nut.
2.3 BCM .625 Bas Block: $40
*New
Picture 3
3.1 Aimpoint H1/T1 Low Mount: $35
3.2 Trijicon MRO: $45
*New. Full cowitness.
3.3 Troy Front Sight: $65
3.4 BCM Vert Grip Keymod X2: Both Sold $12 ea.
3.5 Magpul Ranger Plates X2: $8 for both
3.6 BCM FDE Pistol Grip Mod 1: Sold $5
3.7 BCM BLK Pistol Grip Mod 3: Sold $12
3.8 Magpul CTR Stock: Sold $45
*Mil Spec
*Enhanced butt pad
3.9 Magpul XTM Panels FDE: $6 ea.
Thanks for looking
Located in Plainfield. Don't want to travel far. Will ship on your dime.
Prices are pretty firm. Text (219)688-8679 for quickest response or more pictures of anything.
Picture 1
1.1 BCM BLEM upper: Sold $50
*Mostly assembled. Missing the little E-clip for the dust cover.
*There are a few very minor scratches on the top rail and around the CH area.
*With the barrel I have, the fit is VERY tight. I had to use a blow dryer to heat it up to insert the barrel, and same to get it out. I can't say with any certainty if this lies with the barrel or upper, but I think it's the upper. It works just fine, just be aware of the tight fit.
1.2 BCM BCG: $150
*This might have like 60 or so rounds though it. It might be unfired. I honestly can't remember if I shot it. Was installed in a gun at least.
1.3 BCM Complete Lower Sold - Posted in Long Guns Classifieds. https://www.indianagunowners.com/fo...uns/425810-factory-bcm-lower.html#post6822371
Picture 2
2.1 BCM Barrel: $165
*New
*Specs: 14.5 inch, Midlength, Light weight, Standard (not BFH)
*See disclaimer on 1.1
2.2 BCM KMR Alpha 13: Sold $150
*Was installed on rifle, but you'd hardly know it. VERY good condition.
*Comes with all hardware including a brand new barrel nut.
2.3 BCM .625 Bas Block: $40
*New
Picture 3
3.1 Aimpoint H1/T1 Low Mount: $35
3.2 Trijicon MRO: $45
*New. Full cowitness.
3.3 Troy Front Sight: $65
3.4 BCM Vert Grip Keymod X2: Both Sold $12 ea.
3.5 Magpul Ranger Plates X2: $8 for both
3.6 BCM FDE Pistol Grip Mod 1: Sold $5
3.7 BCM BLK Pistol Grip Mod 3: Sold $12
3.8 Magpul CTR Stock: Sold $45
*Mil Spec
*Enhanced butt pad
3.9 Magpul XTM Panels FDE: $6 ea.
Thanks for looking
Last edited: