Hey, my boat lift lately is harder to lower than it is to crank up. I have pumped a ton of grease into it to no avail.
See pic below.
On the stem just to the right of the zerk are two plates. When the lift is almost all the way down it operates normally, spins easily. The second plate the one with out the gears spins. When it is hard to lower both of them move together. I think something is not releasing allowing the inner one to spin freely.
Ideas?
See pic below.
On the stem just to the right of the zerk are two plates. When the lift is almost all the way down it operates normally, spins easily. The second plate the one with out the gears spins. When it is hard to lower both of them move together. I think something is not releasing allowing the inner one to spin freely.
Ideas?