Built this for my chevelle and sold the chevelle and still have this here!
block is a 1966 283 bored out .040
have all receipts on build NEVER been started yet needs a carb and the valves ran before turned over to run. Sat on stand with bag over it since built, time for someone to get some use out of it!
All new internals:
Summit cam and lifter kit
Clevite rod and main bearings
Rods resized and rod bolts
Crank turned
New pushrods
Converted the oil filter from canister to spin on type
New 4barrel aluminum intake (Summit)
HEI distibutor
Heads have new valve guide oil seals and exhaust vales casting number is 434 a newer 60cc head off of 305's the 283's originals were cracked.
Trans is a 350TH short tailshaft all stock
Located in Frankfort
Will get pics tomorrow
Eng and trans 750.00
with engine stand and cherry picker 1,000.00
Engine stand will hold big blocks not a cheap-O
block is a 1966 283 bored out .040
have all receipts on build NEVER been started yet needs a carb and the valves ran before turned over to run. Sat on stand with bag over it since built, time for someone to get some use out of it!
All new internals:
Summit cam and lifter kit
Clevite rod and main bearings
Rods resized and rod bolts
Crank turned
New pushrods
Converted the oil filter from canister to spin on type
New 4barrel aluminum intake (Summit)
HEI distibutor
Heads have new valve guide oil seals and exhaust vales casting number is 434 a newer 60cc head off of 305's the 283's originals were cracked.
Trans is a 350TH short tailshaft all stock
Located in Frankfort
Will get pics tomorrow
Eng and trans 750.00
with engine stand and cherry picker 1,000.00
Engine stand will hold big blocks not a cheap-O