jmdavis984
Plinker
SOLD
Built from the bottom up, just to experience building one. It’s built on Anderson receivers and parts kits, with the following parts:
MFT BattleLink Minimalist Stock
Magpul MIAD grip
AIM Nickel Boron BCG
Strike Industries extended charging handle
ALG EMR V2 13” Rail
Yankee Hill steel gas block
Ballistic Advantage Modern Series 16” Govt profile mid-length barrel
UTG Low Profile folding sights
Weaver Kaspa 1.5-6x32 IR Scope
UTG Max Strength QD High Rings
Magpul BAD Lever
(Scope + Rings is negotiable. I’ll keep if buyer doesn’t want it, and price accordingly).
Includes one FDE Gen2 PMag, a Lancer L5 20-rnd, and a steel 20-rnd mag.
The trigger is 3.75-4lbs.
Lightly polished the sear faces (NOT stoned/filed/sanded)
JPE hammer/trigger springs
Bobbed hammer
Taylor Tactical trigger adjustment grip screw.
The trigger has been cycled 500 times. It has never failed to hold the hammer or reset.
Round count is probably around 200. Mix of brass and steel cased, American Eagle, personal reloads, PPU Match, and TULA. No light primer strikes
Asking $850, Located in Greenfield (east side of Indy).
I would consider the following trades with cash:
KelTec Sub-2000 Gen2 in 9mm (G17 configuration prefered)
Savage Mark II FV-SR
Taurus G3C
Freedom Ordnance FX9 (16")
Built from the bottom up, just to experience building one. It’s built on Anderson receivers and parts kits, with the following parts:
MFT BattleLink Minimalist Stock
Magpul MIAD grip
AIM Nickel Boron BCG
Strike Industries extended charging handle
ALG EMR V2 13” Rail
Yankee Hill steel gas block
Ballistic Advantage Modern Series 16” Govt profile mid-length barrel
UTG Low Profile folding sights
Weaver Kaspa 1.5-6x32 IR Scope
UTG Max Strength QD High Rings
Magpul BAD Lever
(Scope + Rings is negotiable. I’ll keep if buyer doesn’t want it, and price accordingly).
Includes one FDE Gen2 PMag, a Lancer L5 20-rnd, and a steel 20-rnd mag.
The trigger is 3.75-4lbs.
Lightly polished the sear faces (NOT stoned/filed/sanded)
JPE hammer/trigger springs
Bobbed hammer
Taylor Tactical trigger adjustment grip screw.
The trigger has been cycled 500 times. It has never failed to hold the hammer or reset.
Round count is probably around 200. Mix of brass and steel cased, American Eagle, personal reloads, PPU Match, and TULA. No light primer strikes
Asking $850, Located in Greenfield (east side of Indy).
I would consider the following trades with cash:
KelTec Sub-2000 Gen2 in 9mm (G17 configuration prefered)
Savage Mark II FV-SR
Taurus G3C
Freedom Ordnance FX9 (16")
Attachments
Last edited: