At one point I was doing a fair amount of T/C barrel recrowns, most wouldn't fit in my lathe - so I purchased this tool. Absolutely pristine condition, some of the pilots have never been used.
Haven't touched it in a couple of years, so it is time for a new home.
Includes the following pilots, 22, 6mm, 7mm, 30, 338, 358 and 50(will work from .492 pistol through at least .505 bore diameter).
It is the five pilot set sold by Brownells, plus a few extra pilots I bought directly from Dave.
$425 shipped. Not looking for anything in particular in trade, try me.
http://www.brownells.com/gunsmith-t...amers-muzzle-crown-refacing-kit-prod7718.aspx
Haven't touched it in a couple of years, so it is time for a new home.
Includes the following pilots, 22, 6mm, 7mm, 30, 338, 358 and 50(will work from .492 pistol through at least .505 bore diameter).
It is the five pilot set sold by Brownells, plus a few extra pilots I bought directly from Dave.
$425 shipped. Not looking for anything in particular in trade, try me.
http://www.brownells.com/gunsmith-t...amers-muzzle-crown-refacing-kit-prod7718.aspx