Dedicated 9mm SBR Barrel length?

[jd4320t]

Who all wants a "9mm AR's are junk " shirt to wear on ballistics day??

 

[OneBadV8]

Who all wants a "9mm AR's are junk " shirt to wear on ballistics day??

 

[DaKruiser]

I think I'm gonna go 7" , with the addition of the Gemtech MM

My NFA Trust final draft is ready to be signed so I'll send in the SBR stamp very soon, then follow it the Can Stamp in a month or two.

That sounds like a good compromise for overall length with the can and any added velocity from a longer barrel. I really want to know what the difference will be from a 5" barrel and a 10"-12".

Who all wants a "9mm AR's are junk " shirt to wear on ballistics day??

 

[soljah777]

I started off with a 10.5" spikes barrel. Without a can it was ok. With a can it was too long. Unfortuneatly I did not chrono it before I chopped it. My Spikes barrel is now 5" and I am running a Thompson Machine ISIS on a DDLES lower. My 9mm SBR build has been flawless and very quiet when using Fiocchi 9APE.

 

[IndyRon]

5.5" Noveske

 

[jd4320t]

5.5" Noveske

Noveske 9mm barrel??

 

[OneBadV8]

Noveske 9mm barrel??

Can't be, they don't make any 9mm stuff

 

[shooter521]

Can't be, they don't make any 9mm stuff

They did a run of 9mm AR barrels back in 2008

 

[DaKruiser]

They did a run of 9mm AR barrels back in 2008

I wonder if they put KX3's on them?

 

[LLDJR]

I was a little surprised that Daniels does not make 9mm short barrels, this was my first choice, we bought a 14" DD barrel 5.56 for the Spikes we built

 

[LLDJR]

I think I'm going to go 5", been looking around the 7" with teh Gemtech will be too long, and 50-yards is my max distance anyway.

I might order the entire Double Diamond Upper and Can next week.

Then I still need to decide on teh Aimpoint Micro or Eotech

 

[LLDJR]

Ordered the Complete Upper today with 5.8" barrel

4-6 week lead time

 

[LLDJR]

Ordered this today,, tried locally and nobody had one in stock but Impact Guns in Boise did so, its mine now

Gemtech''s MultiMount is very similar to the SWR Trident-9 - it offers a wide variety of modular mounts that screw into the rear of the suppressor (threaded booster / 3-lug / fixed threadmount endcap, etc.). The MultiMount is a very flexible can, offering the ability to run on handguns, subguns, 9mm ARs, etc. The body of the suppressor has an outside diameter of 1.375", allowing greater internal volume and impressive performance. The MultiMount is available in 9mm only.

 

[LLDJR]

More Goodies

Carbine stock end plate for M4/AR15 $4.95
Carbine stock lock ring - castle nut $4.95
Mil-spec Carbine Buffer Tube - 6 position $24.95
Heavy Buffers Q Buffer 8.5 oz $75
Wolf X Spring $20
Spike's Tactical Lower Parts Kit $65.95
Mako Hand Grip O.D. $24.00
Rock River Ambi Safety/Selector $24.99
Troy Ambi Bolt Release $19.99