SouthBendIN
Marksman
WTS: DPMS 20" SDM-R
I've decided to sell my 20" DPMS because I'm in pursuit of a 16" AR. This is a DPMS RFA3SDMR Squad Designated Marksman Rifle. I have been the only owner of this rifle and bought it brand new on October 22, 2007 from a company called Accucast, Inc. in Iowa.
Round count is ~2,000 with only a slight amount of wear inside the chamber and on the bolt.
I took very good care of this rifle and cleaned it after every shooting. It has only been shot outdoors about 3 times and the rest of the time it was shot at in an indoor range. There isn't a visible scratch on this rifle! When it wasn't in my hands it spent its time unloaded in a padded case. I'm asking $950 Firm.
______________________________________________________________
Here are the specs of this rifle from DPMS:
DPMS SDM-R
Barrel:
20" Length w/ A2 flash hider (birdcage)
416 Stainless steel heavy barrel (not chrome lined)
Fluted w/12 custom groove flutes
6 grooves, right-hand 1x8 twist, button rifled
Chamber:
5.56 NATO
Method of Operation:
Gas operated rotating bolt
Bolt & Carrier:
8620 steel bolt carrier, heat treated and plated per Mil Spec
Phosphated steel bolt, heat treated and plated per Mil Spec
Sights:
National Match front sight post.
With four set screws for front sight adjustment
Weight:
Empty – 8.85 lbs.
Length:
39 1/2"
Upper Receiver:
A3 Flattop, Forged
7075-T6 aircraft aluminum alloy
Hard coat anodized per Mil Spec and Teflon® coated black
Dust cover
Shell deflector
Round forward assist
Right hand ejection
Lower Receiver:
Forged 7075-T6 aircraft aluminum alloy
Hard coat anodized per Mil Spec and Teflon® coated black
Two-stage semi-auto trigger group
Aluminum trigger guard
Aluminum magazine release button
Stock:
Standard A2 black Zytel Mil Spec w/ trap door assembly
Handguards:
4-Rail aluminum Free Float Tube
Includes 6 rail covers
_____________________________________________________________
The only modification I have done to this rifle is a Magpul pistol grip. I also purchased a Yankee Hill flip-up rear sight ($80 new) that will also come with the rifle. No mags will be included. I have a unused harris bi-pod
adapter that will come with the rifle. I do have the original manual.
Here is some info that I found online about the rifle:
DPMS Squad Designated Marksman Rifle (SDM-R) Punches Targets at 600 Yards
DPMS: AR-15 Rifles, Parts and Accessories.
DPMS 20" SDMR Barrel Assembly : Parts4ar15
Pics:
Located in South Bend, Indiana. Would prefer FTF transaction.
I've decided to sell my 20" DPMS because I'm in pursuit of a 16" AR. This is a DPMS RFA3SDMR Squad Designated Marksman Rifle. I have been the only owner of this rifle and bought it brand new on October 22, 2007 from a company called Accucast, Inc. in Iowa.
Round count is ~2,000 with only a slight amount of wear inside the chamber and on the bolt.
I took very good care of this rifle and cleaned it after every shooting. It has only been shot outdoors about 3 times and the rest of the time it was shot at in an indoor range. There isn't a visible scratch on this rifle! When it wasn't in my hands it spent its time unloaded in a padded case. I'm asking $950 Firm.
______________________________________________________________
Here are the specs of this rifle from DPMS:
DPMS SDM-R
Barrel:
20" Length w/ A2 flash hider (birdcage)
416 Stainless steel heavy barrel (not chrome lined)
Fluted w/12 custom groove flutes
6 grooves, right-hand 1x8 twist, button rifled
Chamber:
5.56 NATO
Method of Operation:
Gas operated rotating bolt
Bolt & Carrier:
8620 steel bolt carrier, heat treated and plated per Mil Spec
Phosphated steel bolt, heat treated and plated per Mil Spec
Sights:
National Match front sight post.
With four set screws for front sight adjustment
Weight:
Empty – 8.85 lbs.
Length:
39 1/2"
Upper Receiver:
A3 Flattop, Forged
7075-T6 aircraft aluminum alloy
Hard coat anodized per Mil Spec and Teflon® coated black
Dust cover
Shell deflector
Round forward assist
Right hand ejection
Lower Receiver:
Forged 7075-T6 aircraft aluminum alloy
Hard coat anodized per Mil Spec and Teflon® coated black
Two-stage semi-auto trigger group
Aluminum trigger guard
Aluminum magazine release button
Stock:
Standard A2 black Zytel Mil Spec w/ trap door assembly
Handguards:
4-Rail aluminum Free Float Tube
Includes 6 rail covers
_____________________________________________________________
The only modification I have done to this rifle is a Magpul pistol grip. I also purchased a Yankee Hill flip-up rear sight ($80 new) that will also come with the rifle. No mags will be included. I have a unused harris bi-pod
adapter that will come with the rifle. I do have the original manual.
Here is some info that I found online about the rifle:
DPMS Squad Designated Marksman Rifle (SDM-R) Punches Targets at 600 Yards
DPMS: AR-15 Rifles, Parts and Accessories.
DPMS 20" SDMR Barrel Assembly : Parts4ar15
Pics:
Located in South Bend, Indiana. Would prefer FTF transaction.
Last edited:
