djsmith1000
Plinker
**** SOLD ****
Selling my bullet casting and reloading setup - everything - I don't have the time unfortunately. List is below with details. Everything is in good barely used shape, although some parts have a bit of surface rust due to being in the garage with changing temperature. Nothing that affects functionality. This is pretty much a complete casting and reloading setup for 9, 38/357, 458 socom, and a reloading setup for 45. Shell plates are compatible with many other calibers as well. There is a significant value just in the supplies. There are plenty of supplies here to start casting and reloading immediately. Note - I have already sold the casting pot.
Columbus, IN area. Will not travel far.
Price is [STRIKE]$750 for all - firm. [/STRIKE]
Prefer to sell, but trade value $1000. Will consider trades that include a quality snubbie hammerless 357 revolver, i.e. Ruger LCR or S&W.
Will ship at your expense, except powder, primers. If you only want one or two things, I will sell and ship with a $50 minimum, but very much prefer to sell as a lot.
Press - Hornady lock and load AP auto progressive with case feeder.
7 spare case retention spirings
[STRIKE]21[/STRIKE] 17 Hornady die bushings (4 SOLD)
I think three different shell plates for case feeder.
Shell plates: [STRIKE]1[/STRIKE]SOLD,[STRIKE]6[/STRIKE]SOLD,8,10,30,44,45
Dies sets
9mm lee carbide
45acp - lee carbide
38spl/357 - lee carbide
[STRIKE]458 Socom redding 2 Die set[/STRIKE] SOLD
458 Socom lee carbide has case stuck in resize die
space rcbs lock ring (1)
[STRIKE]rcbs lock-out die[/STRIKE] SOLD
lee bullet mold handles
lee bullet molds
358-158 6 gang
452-230 6 gang
[STRIKE]457-340 2 gang[/STRIKE] SOLD
Lee resizing dies 356,457
Lee primer trays - 2
Lead, mostly wheel weights, ~1.5 5 gallon buckets - 150-200lbs ish?
hi Tek bullet coating
powder
h110 - 1 1/3 lb
hs-6 - 2lb
red dot -1/3 to 1/2lb
900ish small pistol primers
few large pistol primers
Hundreds of cast bullets - 458 and 357
[STRIKE]Tons of brass - 38, 9, 45, 223, 458 socom[/STRIKE]SOLD, etc.
Pictures:
Press: https://photos.app.goo.gl/iUGXQMihQG3nB6qq9
Shell plates: https://photos.app.goo.gl/ED8PDboWRyZF5MRy8
Lead: https://photos.app.goo.gl/iUGXQMihQG3nB6qq9
Selling my bullet casting and reloading setup - everything - I don't have the time unfortunately. List is below with details. Everything is in good barely used shape, although some parts have a bit of surface rust due to being in the garage with changing temperature. Nothing that affects functionality. This is pretty much a complete casting and reloading setup for 9, 38/357, 458 socom, and a reloading setup for 45. Shell plates are compatible with many other calibers as well. There is a significant value just in the supplies. There are plenty of supplies here to start casting and reloading immediately. Note - I have already sold the casting pot.
Columbus, IN area. Will not travel far.
Price is [STRIKE]$750 for all - firm. [/STRIKE]
Prefer to sell, but trade value $1000. Will consider trades that include a quality snubbie hammerless 357 revolver, i.e. Ruger LCR or S&W.
Will ship at your expense, except powder, primers. If you only want one or two things, I will sell and ship with a $50 minimum, but very much prefer to sell as a lot.
Press - Hornady lock and load AP auto progressive with case feeder.
7 spare case retention spirings
[STRIKE]21[/STRIKE] 17 Hornady die bushings (4 SOLD)
I think three different shell plates for case feeder.
Shell plates: [STRIKE]1[/STRIKE]SOLD,[STRIKE]6[/STRIKE]SOLD,8,10,30,44,45
Dies sets
9mm lee carbide
45acp - lee carbide
38spl/357 - lee carbide
[STRIKE]458 Socom redding 2 Die set[/STRIKE] SOLD
458 Socom lee carbide has case stuck in resize die
space rcbs lock ring (1)
[STRIKE]rcbs lock-out die[/STRIKE] SOLD
lee bullet mold handles
lee bullet molds
358-158 6 gang
452-230 6 gang
[STRIKE]457-340 2 gang[/STRIKE] SOLD
Lee resizing dies 356,457
Lee primer trays - 2
Lead, mostly wheel weights, ~1.5 5 gallon buckets - 150-200lbs ish?
hi Tek bullet coating
powder
h110 - 1 1/3 lb
hs-6 - 2lb
red dot -1/3 to 1/2lb
900ish small pistol primers
few large pistol primers
Hundreds of cast bullets - 458 and 357
[STRIKE]Tons of brass - 38, 9, 45, 223, 458 socom[/STRIKE]SOLD, etc.
Pictures:
Press: https://photos.app.goo.gl/iUGXQMihQG3nB6qq9
Shell plates: https://photos.app.goo.gl/ED8PDboWRyZF5MRy8
Lead: https://photos.app.goo.gl/iUGXQMihQG3nB6qq9
Last edited: