Gluemanz28
Grandmaster
I love the vibra-prime. I don't use the adapters they they provide, just use the primer tube into the vibra-prime, works great. I like to load a 1,000'rounds at a time, so I like to have 10 tubes filled and ready to go.
I love the vibra-prime as well and have been using one for a couple years now. I also have ten of the primer tubes of each size. I always run my loads in groups of 1,000 so I'm all set when the primer tubes are loaded. I can do 10 tubes in about 10 minutes. I have noticed that some of the primers like Winchester and Federal have a curve to them and will sometimes get hung up during the tube filling process. I'm a CCI primer user so it works great on them. It reminds me of the video game centipede watching them follow each other to the tubes.
I did get a Mr Bullet feeder to go along with the case feeder that makes the 650 zoom but you have to visually inspect each case since you lose one spot in the tool head and can longer use the Powder check system when running the bullet feeder. It does free you up to watch other things as well instead of picking up a bullet from the tray. I check the powder in the case and make sure that a case is dropping down like it should. Empty spots at station one causes the primers to fill the tray when a spot is missed