Just going to throw this on here...I have a new never fired complete bolt carrier group. I bought the carrier off of HamLund tactical thinking it was a complete group, when received it was only the carrier. I then contacted them and purchased a new DPMS bolt and all the rest of the parts to complete (firing pin, cam pin, and retainer). Everything is sound and appears to be of good quality (great staking, NOT a MIM gas key, chrome lined, etc). I'm selling it for less than I have into it. Specs per HamLund's website:
-Mil-Spec 8620 tool steel M16 bolt carrier w/shrouded firing pin.
-Carrier has 5.3.1.2 MIL-STD-171 phosphate finish inside and out with 1.2.2.2 MIL-STD-171 hard chrome bore.
-Chrome carrier key.
-Carrier key has 5.3.1.2 MIL-STD-171 phosphate finish inside and out with 1.2.2.2 MIL-STD-171 hard chrome bore.
-Carrier key is attached with Grade 8 hardware and properly staked per the Mil-Spec.
Message me with email address for pics.
Thanks!
$160 FTF or ship at your cost.
Located in Lafayette
SPF
-Mil-Spec 8620 tool steel M16 bolt carrier w/shrouded firing pin.
-Carrier has 5.3.1.2 MIL-STD-171 phosphate finish inside and out with 1.2.2.2 MIL-STD-171 hard chrome bore.
-Chrome carrier key.
-Carrier key has 5.3.1.2 MIL-STD-171 phosphate finish inside and out with 1.2.2.2 MIL-STD-171 hard chrome bore.
-Carrier key is attached with Grade 8 hardware and properly staked per the Mil-Spec.
Message me with email address for pics.
Thanks!
$160 FTF or ship at your cost.
Located in Lafayette
SPF
Last edited: