Got some machining stuff I don't really need. Can be picked up in Decatur or Fort Wayne during the weekdays. USPS money order or cash is the only payment options. Please contact by PM.
SPF Endmill lot- most have been reground, some are new, never used, some have been used, but are in good shape. The group on the left are all carbide, the group on the right are HSS. All will come with a tube to protect them during shipment. $115 +shipping SPF
Lathe insertable turning/facing tool- uses 60° triangle inserts, 3/8" shank, comes with 11 full packs and 1 partial pack of inserts. $50 +shipping
Lathe insertable turning/facing tool- uses 60° triangle inserts, 9/16" shank, comes with 1 full pack of inserts. $20 +shipping
Lathe insert lot- all new, several different styles. $50 +shipping for the lot
45° chamfer mills- both 3/4" shank, not sure what insert or screw they take. $20 +shipping for the pair in the block
Flycutters- both 3/4" shank, smaller one has seen some use, but is still usable with no major damage, bigger one is pretty nice. $25 +shipping for the pair
3" Face mill- new, never used, uses APKT style inserts and screws, 1.000" arbor mount, .375" drive key slot. $35 +shipping
1.5" Face mill- new, never used, uses APKT style inserts and screws, .750" arbor mount, .312" drive key slot. $25 +shipping
4" Valenite Face mill- used, good shape, takes Valenite diamond tipped cartridges, loaded and set now with a full set. 1.250" arbor mount, .500" drive key slot. Used for machining non-ferrous materials only. $35 +shipping
2 Insertable milling tools- not sure what inserts these take, one looks to be some kind of 60° triangle and the other a square or rectangle shaped insert. Both are new. $20 +shipping for the pair
1.250" Insertable endmill- new, takes APKT style inserts and screws, 1.250" shank, 6" long. $45 +shipping
Assorted Lathe tool lot- HSS and cemented carbide lathe tool blanks, most are used, group at bottom are new, a lot of them have forms ground on them. Comes with a holder. $25 +shipping
Boring bar set- used, all .750" shank, uses HSS tool blank. $20 +shipping for the lot
Knurling tool- used, 1" shank, 3 different knurl pitches. $15 +shipping
Starrett ID Micrometer- used, good shape, a couple of the rods could use a little cleanup, not sure of measuring range, looks to be missing a few of the rods. $45 +shipping
Mititoyo 2"-3" inside micrometer- excellent condition, comes in wood case. $55 +shipping
SPF Endmill lot- most have been reground, some are new, never used, some have been used, but are in good shape. The group on the left are all carbide, the group on the right are HSS. All will come with a tube to protect them during shipment. $115 +shipping SPF
Lathe insertable turning/facing tool- uses 60° triangle inserts, 3/8" shank, comes with 11 full packs and 1 partial pack of inserts. $50 +shipping
Lathe insertable turning/facing tool- uses 60° triangle inserts, 9/16" shank, comes with 1 full pack of inserts. $20 +shipping
Lathe insert lot- all new, several different styles. $50 +shipping for the lot
45° chamfer mills- both 3/4" shank, not sure what insert or screw they take. $20 +shipping for the pair in the block
Flycutters- both 3/4" shank, smaller one has seen some use, but is still usable with no major damage, bigger one is pretty nice. $25 +shipping for the pair
3" Face mill- new, never used, uses APKT style inserts and screws, 1.000" arbor mount, .375" drive key slot. $35 +shipping
1.5" Face mill- new, never used, uses APKT style inserts and screws, .750" arbor mount, .312" drive key slot. $25 +shipping
4" Valenite Face mill- used, good shape, takes Valenite diamond tipped cartridges, loaded and set now with a full set. 1.250" arbor mount, .500" drive key slot. Used for machining non-ferrous materials only. $35 +shipping
2 Insertable milling tools- not sure what inserts these take, one looks to be some kind of 60° triangle and the other a square or rectangle shaped insert. Both are new. $20 +shipping for the pair
1.250" Insertable endmill- new, takes APKT style inserts and screws, 1.250" shank, 6" long. $45 +shipping
Assorted Lathe tool lot- HSS and cemented carbide lathe tool blanks, most are used, group at bottom are new, a lot of them have forms ground on them. Comes with a holder. $25 +shipping
Boring bar set- used, all .750" shank, uses HSS tool blank. $20 +shipping for the lot
Knurling tool- used, 1" shank, 3 different knurl pitches. $15 +shipping
Starrett ID Micrometer- used, good shape, a couple of the rods could use a little cleanup, not sure of measuring range, looks to be missing a few of the rods. $45 +shipping
Mititoyo 2"-3" inside micrometer- excellent condition, comes in wood case. $55 +shipping
Last edited: