Wesbaun
Plinker
Mosin Nagant Shorter Lighter Trigger Pull Kit
The kit is for the Mosin Nagant rifles and is used to modify/upgrade the trigger so that the pull is lighter and the travel is shorter.
Shorter and lighter trigger pull equals better accuracy.
The kit is superior to all others offered for the Mosin Nagant rifles because the spring is a new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles.
The kit requires no permanent modifications to the weapon and can be removed as easily as it is installed.
To Install:
1) Remove receiver from the stock
2) Remove sear spring retaining screw
3) Insert sear spring shim
4) Insert sear spring retaining screw and tighten
5) Push trigger retaining pin out until flush with the inside of the trigger
6) Insert trigger return spring inside of trigger cavity
7) Push trigger retaining pin back in through the center of trigger return spring
8) Reassemble
The Kit Will Fit:
Mosin Nagant M91/30
Mosin Nagant M38
Mosin Nagant M44
Chinese type 53
Most other variants with the standard trigger assembly
May not function or may require extra fitting with the Pro Mag Archangel AA9130 aftermarket stock
Mosin Nagant Shorter Lighter Trigger Pull Kit
The kit is for the Mosin Nagant rifles and is used to modify/upgrade the trigger so that the pull is lighter and the travel is shorter.
Shorter and lighter trigger pull equals better accuracy.
The kit is superior to all others offered for the Mosin Nagant rifles because the spring is a new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles.
The kit requires no permanent modifications to the weapon and can be removed as easily as it is installed.
To Install:
1) Remove receiver from the stock
2) Remove sear spring retaining screw
3) Insert sear spring shim
4) Insert sear spring retaining screw and tighten
5) Push trigger retaining pin out until flush with the inside of the trigger
6) Insert trigger return spring inside of trigger cavity
7) Push trigger retaining pin back in through the center of trigger return spring
8) Reassemble
The Kit Will Fit:
Mosin Nagant M91/30
Mosin Nagant M38
Mosin Nagant M44
Chinese type 53
Most other variants with the standard trigger assembly
May not function or may require extra fitting with the Pro Mag Archangel AA9130 aftermarket stock
SHOP NOW
The kit is for the Mosin Nagant rifles and is used to modify/upgrade the trigger so that the pull is lighter and the travel is shorter.
Shorter and lighter trigger pull equals better accuracy.
The kit is superior to all others offered for the Mosin Nagant rifles because the spring is a new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles.
The kit requires no permanent modifications to the weapon and can be removed as easily as it is installed.
To Install:
1) Remove receiver from the stock
2) Remove sear spring retaining screw
3) Insert sear spring shim
4) Insert sear spring retaining screw and tighten
5) Push trigger retaining pin out until flush with the inside of the trigger
6) Insert trigger return spring inside of trigger cavity
7) Push trigger retaining pin back in through the center of trigger return spring
8) Reassemble
The Kit Will Fit:
Mosin Nagant M91/30
Mosin Nagant M38
Mosin Nagant M44
Chinese type 53
Most other variants with the standard trigger assembly
May not function or may require extra fitting with the Pro Mag Archangel AA9130 aftermarket stock
Mosin Nagant Shorter Lighter Trigger Pull Kit
The kit is for the Mosin Nagant rifles and is used to modify/upgrade the trigger so that the pull is lighter and the travel is shorter.
Shorter and lighter trigger pull equals better accuracy.
The kit is superior to all others offered for the Mosin Nagant rifles because the spring is a new design that shortens the trigger instead of turning it into a longer heavier two stage style trigger like all other trigger return springs offered for the Mosin Nagant rifles.
The kit requires no permanent modifications to the weapon and can be removed as easily as it is installed.
To Install:
1) Remove receiver from the stock
2) Remove sear spring retaining screw
3) Insert sear spring shim
4) Insert sear spring retaining screw and tighten
5) Push trigger retaining pin out until flush with the inside of the trigger
6) Insert trigger return spring inside of trigger cavity
7) Push trigger retaining pin back in through the center of trigger return spring
8) Reassemble
The Kit Will Fit:
Mosin Nagant M91/30
Mosin Nagant M38
Mosin Nagant M44
Chinese type 53
Most other variants with the standard trigger assembly
May not function or may require extra fitting with the Pro Mag Archangel AA9130 aftermarket stock
SHOP NOW
