Those of you who have a CZ you know what would attach the CZ 11mm dovetail milled into the top of its receiver.
This is what I found on the CZ webstie:
- CZ 457 1 INCH ALUMINUM RINGS, 11MM DOVETAIL
sku: 40086
$29.99
- CZ 457 30MM ALUMINUM RINGS, 11MM DOVETAIL
sku: 40087
$29.99
- CZUB 457 WEAVER RAIL 0 MOAOUT OF STOCK SKU 10709057
$99.00
I have cantilever rings that work for me b/c they lift up the scope & I turn them around so the are "leaning" back toward my eyes/neck.
This is needful b/c of neck issues: it doesn't "scrunch" down/over/forward well, to look through an optic.
I need a scope to be high and as back as far as possible.
I turn the cantilever rings around backwards to work for me like on my two Rugers.
Would this fit on the 11mm dovetail or would I have to put a rail that fits on the dovetail?
Are there any cantilever rings that would fit on a dovetail?
I had cantilever rings on a Henry lever action once, but I think it had a rail that attached to the dovetail on it.
I have rings that attach to the dovetail on my Henry Pump .22LR with a scope in them, but not quite high enough for me since they aren't cantilever rings.
Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle
Specifications:
Reticle: Dead-Hold BDC
Tube Size: 1"
Length: 13.5"
Weight: 15.8 oz.
Eye Relief: 4"
Vortex Cantilever Ring Mount For 1" Tube with 2" Offset
Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style AR-15 rifles.
The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum construction.
Features:
The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base.
Specifications:
Model: CM-102
Mount Style: Cantilever
Offset: 2"
Rings: 1"
Included in Bundle:
5165490517 Vortex Sanora 4-12x44 - Dead-Hold BDC - SON-412
506424 Vortex Cantilever Ring Mount For 1" Tube w/2" Offset CM-102
My cantilever & scope arrangement on my RPR:
My cantilever & scope arrangement on my 10/22
This is what I found on the CZ webstie:
- CZ 457 1 INCH ALUMINUM RINGS, 11MM DOVETAIL
sku: 40086
$29.99
- CZ 457 30MM ALUMINUM RINGS, 11MM DOVETAIL
sku: 40087
$29.99
- CZUB 457 WEAVER RAIL 0 MOAOUT OF STOCK SKU 10709057
$99.00
I have cantilever rings that work for me b/c they lift up the scope & I turn them around so the are "leaning" back toward my eyes/neck.
This is needful b/c of neck issues: it doesn't "scrunch" down/over/forward well, to look through an optic.
I need a scope to be high and as back as far as possible.
I turn the cantilever rings around backwards to work for me like on my two Rugers.
Would this fit on the 11mm dovetail or would I have to put a rail that fits on the dovetail?
Are there any cantilever rings that would fit on a dovetail?
I had cantilever rings on a Henry lever action once, but I think it had a rail that attached to the dovetail on it.
I have rings that attach to the dovetail on my Henry Pump .22LR with a scope in them, but not quite high enough for me since they aren't cantilever rings.
Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle
Specifications:
Reticle: Dead-Hold BDC
Tube Size: 1"
Length: 13.5"
Weight: 15.8 oz.
Eye Relief: 4"
Vortex Cantilever Ring Mount For 1" Tube with 2" Offset
Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style AR-15 rifles.
The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum construction.
Features:
The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base.
Specifications:
Model: CM-102
Mount Style: Cantilever
Offset: 2"
Rings: 1"
Included in Bundle:
5165490517 Vortex Sanora 4-12x44 - Dead-Hold BDC - SON-412
506424 Vortex Cantilever Ring Mount For 1" Tube w/2" Offset CM-102
My cantilever & scope arrangement on my RPR:
My cantilever & scope arrangement on my 10/22
Last edited: