Thanks- have a bunch of commercial cast that I might try that on, if this current batch works out- didn't think It would be do- able to get the "crayon" lube offTry paint thinner, leave bullets in it over night I use it to get the blue lube off so I can powder coat . Then wash in some kind of soap ,works great .
I don't have the tech skills for pics, but the first 10 came out w a nice even thin coat, second batch of 60ish came out kinda rough and "clumpy" from not being shaken enough- that matters, apparently! Last 100 or so, after getting a proper bowl and lid, and shaking the recommended 5 mins, we're great - only about .0015 larger than before coating. Now I need to order a sizing die, at least for that 2nd batch where I didn't follow directionsWaiting for pics of the initial results.
I don't have the tech skills for pics, but the first 10 came out w a nice even thin coat, second batch of 60ish came out kinda rough and "clumpy" from not being shaken enough- that matters, apparently! Last 100 or so, after getting a proper bowl and lid, and shaking the recommended 5 mins, we're great - only about .0015 larger than before coating. Now I need to order a sizing die, at least for that 2nd batch where I didn't follow directions