Ruger SR22 pistol safety recall
SR22® Pistol Product Safety Bulletin
www.ruger.com
Any SR22 with serial number 369-40078 or lower (including those with a "SS" serial number prefix) is subject to this Safety Bulletin, IF it has either: (1) exhibited (or exhibits in the future) a slack single-action trigger; or (2) discharged upon decocking. If you have ever experienced either of these conditions with your SR22 pistol, you should stop using your pistol and sign up for the Safety Retrofit.
In rare instances, if the left and right frame inserts of Ruger SR22 pistols are not properly secured together, the firing pin blocker lifter and hammer block can move independently of each other, potentially rendering them ineffective. If this situation occurs, the pistol will intermittently exhibit a "slack" single-action trigger and has the potential to discharge if decocked over a live round. NOTE: A "slack" single-action trigger occurs if, while operating the pistol in single-action mode with a magazine inserted, the slide forward, and the manual safety disengaged, a trigger pull does not encounter resistance and the hammer does not fall.
Last edited: