I have an Astigmatism and it is difficult for me to put the front sight dead center between the rear sight dots. I have a TRS-25 on a Buckmark and its much easier to shoot- the dot is still “doubled” but it’s a tiny dot and I don’t have to compete with rear sights for my focus. So, I’d like to add a micro rds to my P320sc.
I’ve been researching a bunch and I have a couple of options. The 320Rx is an option, but it may be a while before it’s readily available, and it will only come in Full and Compact, not Subcompact (correct?) Best I could do is a compact installed in a subcompact grip module.
Another option is to mill my slide, but I’m not really one to do permanent mods and haven’t dealt with recoating a slide before.
So, I am looking into an rds mounted on a dovetail plate in place of the rear sight. So far, I have found 2 plates that will work with a P226 (and thus a P320): a Burris that will fit the Fast Fire 3 and also a Vortex Venom (and I assume a Viper), and a Leupold plate that will fit a Deltapoint and a Redfield Accelerator.
Questions:
1. What MOA would you choose for a carry gun- seems like 8moa is designed for that, but that would cover up a lot of the target at the range… I’m leaning toward the 3moa(ish).
2. A Deltapoint is a little salty cost wise, not sure I could justify that (or an RMR if I milled it). So, Fast Fire 3, Vortex, or Accelerator?
3. Are there any other adapter plates that would work, and open up more options for available sights? It seems that anything that would work on a 226 will also work on a 320.
4. Anything I am missing?
Thanks a ton!
I’ve been researching a bunch and I have a couple of options. The 320Rx is an option, but it may be a while before it’s readily available, and it will only come in Full and Compact, not Subcompact (correct?) Best I could do is a compact installed in a subcompact grip module.
Another option is to mill my slide, but I’m not really one to do permanent mods and haven’t dealt with recoating a slide before.
So, I am looking into an rds mounted on a dovetail plate in place of the rear sight. So far, I have found 2 plates that will work with a P226 (and thus a P320): a Burris that will fit the Fast Fire 3 and also a Vortex Venom (and I assume a Viper), and a Leupold plate that will fit a Deltapoint and a Redfield Accelerator.
Questions:
1. What MOA would you choose for a carry gun- seems like 8moa is designed for that, but that would cover up a lot of the target at the range… I’m leaning toward the 3moa(ish).
2. A Deltapoint is a little salty cost wise, not sure I could justify that (or an RMR if I milled it). So, Fast Fire 3, Vortex, or Accelerator?
3. Are there any other adapter plates that would work, and open up more options for available sights? It seems that anything that would work on a 226 will also work on a 320.
4. Anything I am missing?
Thanks a ton!