Smart switches with Standard Profile and Alexa compatability

[x10]

Our wiring at home is not nominal, I have smart bulbs now but would like to still use switches sometime, I am tired of talking to alexa BUT there is not a single switch box in our house that is a single besides the bedrooms. Every box has 2-4 switches in it and I don't want to break individual switches out and all of the smart switches I find are the wide type "button".

If there was a switch with a standard profile I could keep the old switches that don't need to be smart and add in the smart switch.

these are on sale

https://www.amazon.com/Kasa-Smart-L...1589569341&s=hi&sprefix=Tp+l,tools,160&sr=1-4

 

[jkaetz]

Can't help there, i just swapped ours over to the decora switches and plates. I don't think such a thing exists.

 

[WebSnyper]

Do you have a Zwave compatible hub of some sort? I'm using some of these (though I use the Decora style version) with an alarm.com 2 Gig panel as my Zwave hub, and I have been able to control them with Alexa after I enabled the alarm.com skills on Alexa. You should be able to use with most any zwave compatible hub and then enable the right skills in Alexa to discover the devices.

https://www.lowes.com/pd/GE-GE-Enbrighten-Z-Wave-Plus-In-Wall-Smart-Switch-White-Toggle/1002788372
a few more here:

https://byjasco.com/products/smart-home-automation/z-wave?home_automation_type=466

There may be some versions out there that don't need the Zwave compatible hub but you may have to dig a bit more to find those.

 

[WebSnyper]

This one says no smarthub, etc required:

https://www.amazon.com/GE-Off-3-Wir...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Indicates you need to download their app and add the device to it and then you can add the voice assistant. I have not used these, but have used the Zwave versions listed in the above post and they worked well.