So.. what are you reloading at the moment??

[cmann250]

I bought a Dillon trimmer off Bobcat at the 1500 and my fingers are thanking me. I’m guessing I did 500 .223 based off the time I spent.

The basement sure felt good after being in the heat.


Sent from my iPhone using Tapatalk

 

[Goodcat]

Just decapped and resized 1200 .380acp. Off to the tumbler they go. Yuengling time!

Are you running through a progressive next? Was feeling pretty crazy resizing and decapping only first. Just doing it for ability to clean primer pockets and for smoother operation because they are sized already when I do load.

 

[d.kaufman]

Are you running through a progressive next? Was feeling pretty crazy resizing and decapping only first. Just doing it for ability to clean primer pockets and for smoother operation because they are sized already when I do load.

Not a progressive but a lee 4 hole turret press. I tend to decap and resize on my single stage, then when comes to loading i dont have to do that step. I do it that way, like you, to get the primer pocket clean.

 

[bgcatty]

.44 Magnum for a Henry Big Boy using brand new Starline brass, IMR 4227 powder, Hornady 240 grn XTP bullets and CCI primers.

 

[cmann250]

500 M193-ish. I’ve been trimming and swaging over the past few days. I don’t have as much brass as I thought I did.

Getting close to my rookie badge for 5000 rounds of 223.


Sent from my iPhone using Tapatalk

 

[Wolfhound]

Loading 270 Winchester 130 grain lead tip over H4350 for some practice rounds. Kentucky deer season is just around the corner.

 

[d.kaufman]

Just loaded up 8 variations of 308 to try out tomorrow and see what the new bolt action likes. 150gr, 155gr, 165gr, and 180gr.
Also loaded up some 123gr 6.5grendel to run tomorrow as well

 

[Flyingbrian]

Nothing the Dillon 650 is collecting dust at the moment.

 

[billybob44]

Working some .357 Sig cases.
Have pushed through my Redding Gr-x die to avoid bulge. Next to the carbide .40 S&W die...Bill.

 

[crewchief888]

im in the process of putting together a list of stuff i'll need to load my 45acp open gun for next year. spent some time yesterday rearranging stuff, and adding some sturdier shelves in my reloading room.

still need to grab another 1000 primers, another lb of powder, and order my bullets...

need to start stocking up on 22LR for next year as well.

for me the "shooting season" is winding down, the only matches i'll be shooting for the rest of the year will be steel, and those will clean out what 22LR i have left.

 

[red_zr24x4]

Nothing the Dillon 650 is collecting dust at the moment.

^^This, the 550's as well. Need to start loading 38's

 

[Wolfhound]

Loading some .303 British target rounds. Winchester 748 with 150 grain Hornady .312 lead tip.

 

[cmann250]

My Blue Bullets showed up so I’m on a 2k 45ACP run. It’s a nice break from reloading rifle.


Sent from my iPhone using Tapatalk

 

[Ark]

Burning more Varget on my Garand loads.

Don't think I'll be buying more once I run out what I've got. Any suggestions on a good Garand powder?

 

[laf]

Busy weekend at the press. Put together some .30-30 tracer rounds for show over thanksgiving holiday. Last year I brought a Garand and loaded them in that and they worked well. And to keep everyone entertained I made some subsonic 165 grain loads for the .30-30 as well using 7 grains of Trail Boss.

Dialed in the .308 at the range and am making more 168 matchking rounds that the TC Compass enjoyed most. And since I have Trail Boss I'm attempting some subsonics as well with some Rainer 180 plated bullets and 12 grains of Trail Boss. Also making more 165 grain SST loads for deer season. Got a ton of .308 brass and miscellaneous rounds I'm just having fun experimenting with it. Plenty of .308 cal rifles laying around to try them out on.

 

[bgcatty]

.44 Magnum for the Henry Big Boy Steel with 230 grn. Hornady XTP and 22.5 grns IMR 4227 Starline Brass and CCI LPP.

 

[Doublehelix]

1,500 rounds this weekend of my competition .40 S&W loads. I now have the Mr. Bullet Feeder fully functional and de-bugged, and I have to say, I can really hum along now and crank out the rounds pretty quickly. My elbow(s) start squawking though, so one of these days, I am going to fully automate (either a 1050 or the Mark 7 Evolution Pro).

 

[GSPBirdDog]

300 BLK Subs

Loading some 300 blackout subs for my suppressor.

300 Blackout
200gr coated Eggleston bullets
A1680 10.5gr
CCI small rifle primer
1.950 Overall length
GI Locker converted Brass from LC Cases

 

[Max VonMuller]

9mm, .45, and 300 BO.

 

[sdb321]

ME & DILLON

Posting some pics showing what I'm loading.