So.. what are you reloading at the moment??

[dchuck]

33 pages in (40 posts per page) and I'm one of the sad saps getting into the reloading realm. Only thing I'm loading at present is the central nervous system with the Lyman 50th edition and lots of post scouring/lurking here and elsewhere.

 

[red_zr24x4]

33 pages in (40 posts per page) and I'm one of the sad saps getting into the reloading realm. Only thing I'm loading at present is the central nervous system with the Lyman 10th edition and lots of post scouring/lurking here and elsewhere.

Hiya neighbor!
If you need any help I'm here in town

 

[Squander]

I took this to mean that there was a whiskey called "Lyman 50th edition" since you said it was affecting your central nervous system.

33 pages in (40 posts per page) and I'm one of the sad saps getting into the reloading realm. Only thing I'm loading at present is the central nervous system with the Lyman 50th edition and lots of post scouring/lurking here and elsewhere.

 

[edwea]

6.5 Grendel 120 gn Sierra Pro Hunter over 27.4 gn H4895. I took 3 loads out today to try:26.8, 27.1, 27.4. The 27.4 is max and grouped the best at about .5" at 50. I expect it to do better off a bench than the bipod. It is going to be my deer load this year.

 

[1775usmarine]

Cranked out 100rds of 180gr 40cal over 4.6gr of titegroup during halftime.

 

[cjcycles]

Not as much today. Case feeder control board went out.

Sent from my iPhone using Tapatalk

 

[DadSmith]

Hoosier 124gr Coated RN 9mm over 4.1gr HP38 and CCI 400 primers

 

[JHB]

Hoosier 124gr Coated RN 9mm over 4.1gr HP38 and CCI 400 primers

I run 3.8 same bullet and powder. What are you setting the OAL at. My Glock 48 required a shorter OAL than my 43 and 34.

 

[Fullmag]

Case prep 223 that includes removing crimped primer pockets

 

[DadSmith]

I run 3.8 same bullet and powder. What are you setting the OAL at. My Glock 48 required a shorter OAL than my 43 and 34.

I have 3 9mm and to make them work in all 3 I have a COL of 1.055"

 

[JHB]

I am running 1.06 any longer they won't plunk.

 

[DadSmith]

I am running 1.06 any longer they won't plunk.

I think they are pretty fat up top. I've had good results with the current load. I'll try to post some pictures next time I go out. I'm still playing with this bullet different powders etc.

 

[Leadeye]

41 Colt BP.

 

[d.kaufman]

Putting together some 450 bushmaster loads. Trying some speer 300gr deep curls. Worked up a few 5 round sets using lil gun powder. Charge weights between 29 and 31gr.
Test them out at the NWI meet/shoot/eat a week from tomorrow

 

[Restroyer]

Just loaded 250 rounds of 9mm in a variety of powder (HP-38, Win 231, Titegroup) and variety of bullet weights (115, 124, & 147 grains) to test out in my new Draco Nak9 and new Tisas PX-9 tomorrow afternoon. I picked a good year to start reloading with the big ammo shortages.

 

[Gluemanz28]

Loading more 9mm 124 gr RMR MPR on top of HS-6
chrono 10 string 1211 FPS
Spread of 24 FPS
Standard Deviation 8
OAL 1.160

after the final inspection they get boxed up in Milspec boxes from www.repackbox.com. Really nice boxes.

 

[1775usmarine]

Loading more 9mm 124 gr RMR MPR on top of HS-6
chrono 10 string 1211 FPS
Spread of 24 FPS
Standard Deviation 8
OAL 1.160

after the final inspection they get boxed up in Milspec boxes from www.repackbox.com. Really nice boxes.

Love the RMR bullets.

 

[Gluemanz28]

Love the RMR bullets.

Me too! Plus Jacob Wilcox is a great guy so supporting him is an easy choice.

 

[1775usmarine]

Me too! Plus Jacob Wilcox is a great guy so supporting him is an easy choice.

Got an order from beginning of sept for 3k of their 115gr but in no rush even though they do a great job of informing folks of the delays.

 

[76caprice]

I haven’t loaded anything all year. Been shooting the ammo I have made that’s in ammo cans. Then when this craziness happens I just want to save my supplies for when needed. Last thing I do recall was 180gr SnS RN loaded to 1.165 with 4.2 grains of titegroup.