Fiber front sight, adjustable rear
10-8 gen2 bar stock slide stop
10-8 flat trigger
EGW sear
EGW bar stock machined safety
Custom wire EDM cut s7 steel hammer
Dawson Hyper drive firing pin
EGW disconecctor
Brazos tuned Ejector
EGW HD extractor
Gunsmith fit match bushing
S&A magwell, blended to frame on mill and hand finished
Dawson cam lock mag button
Full length guide rod
VZ grips
2.75lb trigger with a VERY positive reset (.14-.15 splits are pretty easy with it)
Slide has been tri-topped and hi power cuts up front.
The goal was to have it make weight by keeping the bottom half heavy and the slide light (like a nice open gun), and it worked. It shoots very flat.
[video=youtube_share;5umb2CaHef8]http://youtu.be/5umb2CaHef8[/video]
[video=youtube_share;kn6wQb2myKs]http://youtu.be/kn6wQb2myKs[/video]
It has just been re-cerakoted.
Over $1600 "invested" (yeah, I know....investments should make you money not lose it)
$1400 plus shipping, delivery available within reasonable distance of Indy
NO TRADES.
10-8 gen2 bar stock slide stop
10-8 flat trigger
EGW sear
EGW bar stock machined safety
Custom wire EDM cut s7 steel hammer
Dawson Hyper drive firing pin
EGW disconecctor
Brazos tuned Ejector
EGW HD extractor
Gunsmith fit match bushing
S&A magwell, blended to frame on mill and hand finished
Dawson cam lock mag button
Full length guide rod
VZ grips
2.75lb trigger with a VERY positive reset (.14-.15 splits are pretty easy with it)
Slide has been tri-topped and hi power cuts up front.
The goal was to have it make weight by keeping the bottom half heavy and the slide light (like a nice open gun), and it worked. It shoots very flat.
[video=youtube_share;5umb2CaHef8]http://youtu.be/5umb2CaHef8[/video]
[video=youtube_share;kn6wQb2myKs]http://youtu.be/kn6wQb2myKs[/video]
It has just been re-cerakoted.
Over $1600 "invested" (yeah, I know....investments should make you money not lose it)
$1400 plus shipping, delivery available within reasonable distance of Indy
NO TRADES.
Last edited:
